Eiki EIP-2600, EIP-250 quick start Computer Compatibility Chart

Computer Compatibility Chart

Computer

• Multiple signal support				Pixel Clock: 12-170 MHz
Horizontal Frequency: 15-110 kHz,				Sync signal: Compatible with TTL level
Vertical Frequency: 45-85 Hz,				• Compatible with sync on green signal
The following is a list of modes that conform to VESA. However, this projector supports other
signals that are not VESA standards.
PC/MAC	Resolution		Horizontal Frequency	Vertical Frequency	VESA	* DVI-D		Display
			(kHz)	(Hz)	Standard	Support	EIP-2600		EIP-250
		640 × 350	27.0	60
			31.5	70
			37.5	85	✔
		640 × 400	27.0	60
			31.5	70		✔
			37.9	85	✔
		720 × 350	27.0	60
	VGA		31.5	70					Upscale
		720 × 400	27.0	60
			31.5	70
			37.9	85	✔
			26.2	50			Upscale
			31.5	60	✔
		640 × 480	34.7	70
			37.9	72	✔
			37.5	75	✔
			43.3	85	✔
			31.4	50
			35.2	56	✔
	SVGA	800 × 600	37.9	60	✔				True
			46.6	70
			48.1	72	✔
			46.9	75	✔
PC			53.7	85	✔	✔
			40.3	50
	XGA	1024 × 768	48.4	60	✔		True
			56.5	70	✔
			60.0	75	✔
			68.7	85	✔
		1280 × 720	45.0	60
		1280 × 768	47.8	60	✔
	WXGA	1280 × 800	49.7	60	✔
		1280 × 800	62.8	75	✔				Intelligent
		1360 × 768	47.7	60	✔
									Compression
		1366 × 768	47.8	60			Intelligent
		1152 × 864	55.0	60
	SXGA		66.2	70			Compression
			67.5	75	✔
		1280 × 1024	64.0	60	✔
		1280 × 1024	80.0	75	✔
	SXGA+	1400 × 1050	64.0	60
			65.3	60	✔
	UXGA	1600 × 1200	75.0	60	✔
MAC 13"	VGA	640 × 480	34.9	67			Upscale		Upscale
MAC 16"	SVGA	832 × 624	49.7	75					Intelligent
MAC 19"	XGA	1024 × 768	60.2	75			True
MAC 21"	SXGA	1152 × 870	68.7	75			Intelligent		Compression
							Compression

*EIP-2600 only

Note

•When this projector receives 640K350 VESA format VGA signals, “640 × 400” appears on the screen.

•Optimum image quality will be achieved by matching your computer’s output resolution to the resolution that corresponds to “True” in the “Display” column shown above.

•When “Screen resolution" of the computer is different from the resolution displayed on the projected im- age, follow the procedures shown below.

–Refer to “Select the resolution” for “Data image is not centered” on the Help menu and select the same resolution as the resolution in “Screen resolution” of the computer.

–Depending on the computer you are using, the output signal may not be faithful to the “Screen resolution” adjustment. Check the settings of the computer’s signal output. If the settings cannot be changed, it is recommended that the resolution be set to the one that corresponds to “True” in the “Display” column.

DTV

Signal	Horizontal	Vertical	* DVI-D Support	Signal	Horizontal	Vertical	* DVI-D Support
	Frequency (kHz)	Frequency (Hz)	(Compatible with HDCP)		Frequency (kHz)	Frequency (Hz)	(Compatible with HDCP)
480I	15.7	60		720P	45.0	60	✔
480P	31.5	60	✔	1035I	33.8	60	✔
540P	33.8	60		1080I	28.1	50	✔
576I	15.6	50		1080I	33.8	60	✔
576P	31.3	50	✔	1080P	56.3	50	✔
720P	37.5	50	✔	1080P	67.5	60	✔

* EIP-2600 only

62