Unpacking the SSP-30 Mkii, Ventilation | Classe Audio SSP-30 MKII

Section 1.0 - Getting Started

1.1Unpacking the SSP-30 MKII

Your Classé SSP-30 MKII is packed in high-density foam inside a special cardboard container. To remove the unit, carefully open and spread the Top box flaps. (There are heavy-duty staples under each end of the lengthwise tape.) Remove the top foam piece(s) and then carefully remove the SSP-30 MKII itself. Be Careful with it while it is still covered in the protective plastic, insuring that you do not rest it on its front or rear, as possible damage to knobs and connectors can occur. Put it down carefully on a flat, soft surface. Take it out of the heavy plastic bag and place the SSP-30 MKII on a sturdy surface. Carefully inspect it and report any concealed damage to your dealer immediately.

In addition, look for the following accessories:

1)The Owner’s Manual (This one)

2)One detachable AC power cord.

3)One remote control handset (with two AAA batteries).

We strongly recommend that you save the shipping carton and foam inserts. The REQUIRED Replacements are expensive to purchase. The packaging was designed to protect the SSP-30 MKII under almost all circumstances and will be very useful in protecting the valuable electronic instrument if you move or need to ship the unit for any reason.

1.2Optimal Placement

Carefully locate the SSP-30 MKII. Follow the safety precautions in this manual regarding exposure to heat and moisture.

Stable, high-strength shelving or equipment racks specifically designed for audio/video components are best.

Place the SSP-30 MKII close enough to other components to allow convenient connection. This is especially true for source components (CD player, DVD player…) where shorter cable runs are best. However, we do not recommend closely stacking the SSP-30 MKII with other components, especially tuners, as they may be affected by radio-frequency emissions from the SSP-30 MKII’s microprocessor.

Allow at least four inches of free space behind the SSP-30 MKII to accommodate interconnect cables, power cords, etc. Four inches of unobstructed free space above the SSP-30 MKII’s chassis cover will allow sufficient air circulation to dissipate the small amount of heat.

Isolate power amplifiers as much as possible to avoid the magnetic fields often generated by their large power-supply transformers. The SSP-30 MKII’s high current output stage is virtually immune to problems sometimes encountered when the power amplifiers are far away at the end of long cable runs.

We do not recommend placing the processor near power amplifiers since they produce heat.

1.3Ventilation

CAUTION: Ventilation is very important. We do not recommend attempting to operate the SSP-30 MKII if the ambient temperature exceeds 40°C (100°F). There are components inside which produce heat. If there is insufficient ventilation around the chassis the processors will overheat and may act erratically until allowed to cool. Any cabinet should have adequate airflow to allow warm air to leave and cooler room air to enter. Positive Ventilation is required in some installations due to the heat generated by the associated electronics.

SSP-30 MKII specifications

The Classe Audio SSP-30 MKII is a high-performance surround sound processor that has garnered attention from audiophiles and home theater enthusiasts alike. Known for its exceptional build quality and sound engineering, the SSP-30 MKII continues the legacy of Classe Audio, a brand synonymous with premium audio products.

One of the standout features of the SSP-30 MKII is its advanced processing capabilities. The unit supports various audio formats, including Dolby Atmos, DTS:X, and others, allowing for a truly immersive audio experience. The processor utilizes 24-bit/192 kHz DACs, ensuring that the audio reproduction is incredibly detailed and accurate, making it a top choice for those looking to create a high-end listening environment.

The SSP-30 MKII incorporates advanced room correction technology, which allows users to optimize their listening environment. This technology analyzes the acoustics of the room and adjusts the audio output accordingly, compensating for any anomalies in the space, such as reflections and absorption. This results in a balanced sound that maintains clarity and precision regardless of the room's characteristics.

Connectivity options are plentiful with the SSP-30 MKII. It features multiple HDMI inputs, ensuring compatibility with various video sources, as well as analog and digital audio inputs for flexibility in connecting different devices. Furthermore, the processor supports 4K video passthrough, making it an ideal choice for home theater setups that incorporate the latest video technologies.

The user interface of the SSP-30 MKII has been designed with simplicity in mind. With a well-organized menu system and intuitive remote control, adjusting settings and navigating through options is a seamless experience. The inclusion of programmable presets allows users to save their preferred audio settings for different listening scenarios, adding to the convenience and functionality of the unit.

Aesthetic appeal is another hallmark of the Classe Audio SSP-30 MKII. The sleek and modern design features a high-quality aluminum chassis that not only enhances durability but also looks stunning in any audio or video setup. The level of craftsmanship is evident throughout the product, making it as much a piece of art as it is a piece of technology.

In summary, the Classe Audio SSP-30 MKII is a formidable surround sound processor that delivers on multiple fronts. With its advanced audio processing, cutting-edge technologies, extensive connectivity, user-friendly interface, and elegant design, it stands out as a premium choice for anyone looking to elevate their audio experience. Whether for movies, music, or gaming, the SSP-30 MKII promises to provide an extraordinary sonic experience that is hard to match.