Classe Audio SSP-30 MKII owner manual Few notes about the SSP-30 Mkii and the Set-up

Page 8

A few notes about the SSP-30 MKII and the Set-up

The SSP-30 MKII decodes Dolby Digital EX©, DTS-ES Matrix© and Dolby Pro Logic II ©. It also functions as a high quality stereo preamplifier. The 7.1 channel input is equipped with comprehensive volume control facilities and ensures that the SSP-30 MKII will remain compatible with new multi-channel formats as they appear. The SSP-30 MKII also has several music modes that may be used to enhance a normal stereo signal.

The SSP-30 MKII accepts up to seven digital input sources, eight line-level input sources, plus a tape loop and two additional record outputs. It has six composite and S-Video inputs, composite and S-Video monitor outputs, composite and S-video record outputs and an S-Video monitor output without On Screen Display (OSD) for highest quality video performance.

The SSP-30 MKII has two main modes of operation. In the normal operation mode the SSP-30 MKII automatically senses the type of the incoming signal and selects the best mode for that signal. The user can over-ride the automatic selection and select different post-processing modes for the incoming signals. These modes feature a mono down-mix, stereo, Stereo96, Dolby Pro Logic and four Music modes: Natural, Party, PLII Music and Neo6: Music. The user can bypass the digital section of the SSP-30 MKII, if desired, and connect, for example, a high quality stereo source to the Left and Right channels of the 7.1 channel input.

The SSP-30 MKII is supplied with a comprehensive IR remote control.

Options for system integration are provided by RC5 jacks to interface with other Classé products, by the three I2VDC trigger outputs to control external equipment and can communication with a PC or home automation system via the RS

232interface. Installation note

This preamplifier generates a modest amount of heat and thus requires ventilation. Do not place it on a rug or other soft surface into which it could sink. The SSP-30 MKII should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. . Do not place another unit on top of the SSP-30 MKII. Do not place the SSP- 30 MKII above a unit that generates heat.

CAUTION: To prevent a fire or shock hazard, do not permit this product to become wet. If liquid is accidentally spilled on it, unplug the AC cord it from the wall. Allow sufficient time for then SSP-30 MKII to completely dry out before attempting to operate it again. If the spilled liquid is anything but clear water and/or alcohol, a qualified service technician should examine the processor before it is used again.

Do not remove the cover, or attempt to modify or repair the processor yourself. Refer all servicing to a qualified technician.

This product is manufactured under license from DTS©, and Dolby Laboratories Licensing Corporation. “Dolby”, the double-D symbol, “Dolby Digital©” and “Pro Logic” are trademarks of Dolby Laboratories Licensing Corporation.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SSP-30 Mkii Page Important Safety Information Thank You From Everyone At Classé Page Contents Ventilation Optimal PlacementUnpacking the SSP-30 Mkii Few notes about the SSP-30 Mkii and the Set-up SSP-30 Mkii Rear Panel Connecting the SSP-30 Mkii SSP-30 Mkii Rear Panel For Example Front Panel Controls SSP-30 Mkii Remote Control Page Page Setting Up the SSP-30 Mkii Main menu Audio setupAudio Setup Audio setup Dolby/DTS setupLevel setup Left0.0dB Speaker SetupSpeaker setup Level setup Distance setup Left1.0m Level setupSource Setup Size setup Main speakers LargeSource setup Source1 Source SetupTV system Display SetupDisplay setup Trigger Setup Trigger setup Trig1 sense Power OnUsing the Tape Inputs and Outputs Recording AUDIO/VIDEO, Audio only and Digital AUDIO/VIDEORecording Analog Audio only Recording Digital AUDIO/VIDEORemote Zone USE Recording Digital Audio onlyZone B off StereoM.Z Zone VID1 StereoZ.vToggle On/Off System System25Ext7.1 Tape Toggle Title/ChapterRC5 Codes for Classé Surround Processors and CD/DVD-1 Toggle On/OffMusic Mode C, LS, RS Analog Appendix BDTS Neo6 C, LS, RS, LB, RB Analog Copyright 2002 by Classé Audio, Inc. All rights reserved

SSP-30 MKII specifications

The Classe Audio SSP-30 MKII is a high-performance surround sound processor that has garnered attention from audiophiles and home theater enthusiasts alike. Known for its exceptional build quality and sound engineering, the SSP-30 MKII continues the legacy of Classe Audio, a brand synonymous with premium audio products.

One of the standout features of the SSP-30 MKII is its advanced processing capabilities. The unit supports various audio formats, including Dolby Atmos, DTS:X, and others, allowing for a truly immersive audio experience. The processor utilizes 24-bit/192 kHz DACs, ensuring that the audio reproduction is incredibly detailed and accurate, making it a top choice for those looking to create a high-end listening environment.

The SSP-30 MKII incorporates advanced room correction technology, which allows users to optimize their listening environment. This technology analyzes the acoustics of the room and adjusts the audio output accordingly, compensating for any anomalies in the space, such as reflections and absorption. This results in a balanced sound that maintains clarity and precision regardless of the room's characteristics.

Connectivity options are plentiful with the SSP-30 MKII. It features multiple HDMI inputs, ensuring compatibility with various video sources, as well as analog and digital audio inputs for flexibility in connecting different devices. Furthermore, the processor supports 4K video passthrough, making it an ideal choice for home theater setups that incorporate the latest video technologies.

The user interface of the SSP-30 MKII has been designed with simplicity in mind. With a well-organized menu system and intuitive remote control, adjusting settings and navigating through options is a seamless experience. The inclusion of programmable presets allows users to save their preferred audio settings for different listening scenarios, adding to the convenience and functionality of the unit.

Aesthetic appeal is another hallmark of the Classe Audio SSP-30 MKII. The sleek and modern design features a high-quality aluminum chassis that not only enhances durability but also looks stunning in any audio or video setup. The level of craftsmanship is evident throughout the product, making it as much a piece of art as it is a piece of technology.

In summary, the Classe Audio SSP-30 MKII is a formidable surround sound processor that delivers on multiple fronts. With its advanced audio processing, cutting-edge technologies, extensive connectivity, user-friendly interface, and elegant design, it stands out as a premium choice for anyone looking to elevate their audio experience. Whether for movies, music, or gaming, the SSP-30 MKII promises to provide an extraordinary sonic experience that is hard to match.
Top Page Image Contents