Eiki AH-69601 owner manual Filter Time Check and Reset, Resetting the Filter Time

Page 10

OPERATION

FILTER TIME CHECK AND RESET

FILTER TIME CHECK

The filter operation time can be checked in the projector menu.

Open [INFORMATION] in the menu and check [Option filter time] for the hour counter.

"Option filter time" menu will not exist when Smoke Resistant Box is not attached on the projector.

RESETTING THE FILTER TIME

Reset the filter time according to the following procedures:(Only reset the filter time when changing the filter. The Smoke Resistant Box cannot be operated properly if it is reset other than filter change.)

1 Check that the Smoke Resistant Box is properly attached to the projector.

2 Turn on the projector and display the screen.

Check all indicators on the Smoke Resistant Box light normally.

3 Select [SPECIAL] in the projector's menu. Then select [Filter].

4 Select [Option box] and then select [Reset] and then [Yes].

ON OFF OFF

5 A message [Please wait--] will appear. When it disappears Filter Time reset is completed. Close the menu.

10

Image 10
Contents Model AH-69601 To the Owner Risk of Electric Shock Do not OpenTable of Contents FeaturesPart Names Part NamesPrecaution Before Installation InstallationInstallation Procedure of InstallationConnector or Apply Shock Pins That MAY Damage the Connector Operation Indicators OperationOperation Initial SET-UP Before USEFilter Replacement Open the filter cover and take out the used filter Resetting the Filter Time Filter Time Check and ResetFilter Time Check Troubleshooting MaintenanceAppendix Dimensions SpecificationsPage Key to better communications Canada