INSTALLATION
INSTALLATION
PRECAUTION BEFORE INSTALLATION
Please ensure that there is sufficient clearance around the unit at the time of installation, as shown in the figure on the right.
WARNING: DO NOT COVER INTAKE VENTS.
If the Air Intake is covered, there will be in- sufficient cooling which may result in failure or fire.
At least 20'' (50cm)
At least
30''
(75cm)
At least
40''
(100cm)
AIR INTAKE VENTS
FRONT
CAUTION:UNPLUG THE PROJECTOR FROM THE AC OUTLET WHEN INSTALLING THE SMOKE RESISTANT BOX.
ATTACHING THE SMOKE RESISTANT BOX WHILE THE PROJECTOR IS CONNECTED TO ELECTRICITY MAY DAMAGE THE BOX OR CAUSE IT TO MALFUNCTION.
PROCEDURE OF INSTALLATION
1
2
Take out the Smoke Resistant Box from the packaging and place it on a flat surface with the projector.
Take off the connector cover from the Projector.
RETAIN THE CONNECTOR COVER.
WHEN THE SMOKE RESISTANT BOX IS NOT
BEING USED, REATTACH THE CONNECTOR
COVER TO THE PROJECTOR TO PROTECT
THE CONNECTOR.
CONNECTOR COVER
5