Eiki AH-69601 owner manual Connector or Apply Shock Pins That MAY Damage the Connector

Page 6

INSTALLATION

3

4

Align the connector of the Projector with the connector pins of the Smoke Resistant Box.

CAUTION:TAKE CARE NOT TO TOUCH

THE CONNECTOR OR APPLY SHOCK PINS

THAT MAY DAMAGE THE CONNECTOR.

Hold the Smoke Resistant Box parallel to the

Projector and push it slowly towards the Projector.

5 Hold the Smoke Resistant Box with one hand and

PHILLIPS-HEAD

use a Phillips-head screwdriver to tighten the four

fixed screws to fix the box in place.

SCREWDRIVER

6 Check that the Smoke Resistant Box is fixed in place with the four screws and no wide gap exists between the projector body and the box.

THERE SHOULD BE NO WIDE GAP

THERE SHOULD BE NO WIDE GAP

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model AH-69601 To the Owner Risk of Electric Shock Do not OpenTable of Contents FeaturesPart Names Part NamesPrecaution Before Installation InstallationInstallation Procedure of InstallationConnector or Apply Shock Pins That MAY Damage the Connector Operation Indicators OperationOperation Initial SET-UP Before USEFilter Replacement Open the filter cover and take out the used filter Filter Time Check and Reset Resetting the Filter TimeFilter Time Check Maintenance TroubleshootingAppendix Dimensions SpecificationsPage Key to better communications Canada
Top Page Image Contents