TRIM Press this key to cycle through a list of options which will allow you to adjust the loudness of the Subwoofer, Center, or Surround speakers, or to temporarily alter the spectral balance of the sound in all speakers by adjusting the treble or the bass content. Use the TRIM /\ or \/ keys to adjust the selected parameter. This is a temporary adjustment - when the
TRIM \/ Press this key to decrease the loudness of the speaker previously selected with the TRIM key, or to reduce the treble or bass content of the sound in all speakers.
TRIM /\ Press this key to increase the loudness of the speaker previously selected with the TRIM key, or to increase the treble or bass content of the sound in all speakers.
EXIT (CANCEL) Press this key to leave the Setup Menus without saving any of the changes you might have made.
/\ This key has two functions: Press this key to navigate through the different selections
available in the Setup Menus, while in a menu select or change a value. ALSO: After pressing the ZONE key (followed by the Standby key if the Zone had not been previously enabled), the /\ key will increase the volume at the Zone outputs.
MENU Pressing the MENU key brings up the page of the Setup Menu you were last using. This makes it easy to return to a setup parameter you were trying to get just right. No matter where you start in the Setup Menu, you can quickly and easily navigate to any other section.
<This key has two functions: Press this key to navigate through the different selections available in the Setup Menus, while in a menu select or change a value. ALSO: After pressing the ZONE key (followed by the Standby key if the Zone had not been previously enabled), the < key will scroll through the Audio and Audio/Video Sources to play at the Zone outputs
ENTER The ENTER key is used in the Setup Mode to memorize a change, or to access a sub menu. When you are not in a menu, pressing the ENTER key once will scan through all of the active inputs.
>This key has two functions: Press this key to navigate through the different selections available in the Setup Menus, while in a menu select or change a value. ALSO: After pressing the ZONE key (followed by the Standby key if the Zone had not been previously enabled), the > key will scroll through the Audio and Audio/Video Sources to play at the Zone outputs.
\/ This key has two functions: Press this key to navigate through the different selections available in the Setup Menus, and while in a menu to select or change a value. ALSO: After pressing the ZONE key (followed by the Standby key if the Zone had not been previously enabled), the \/ key will decrease the volume at the Zone outputs.
13