Control Panel and Remote Control
There are five sections on the Remote Control as described below.
LED indicator: The LED will light when the Remote Control is functioning. If not, please check your batteries.
Section A: BLUE characters, for PROJECTOR use
1.POWER: Powers On/Off the projector
2.
3.ZOOM+: Increases the image size (For projector use)
4.MUTE: Mutes the audio output. Press once for Mute on ,press again for mute off.
5.SLEEP: Turns off the projector after a period. (So the time you
6.FREEZE: Freezes the image.
7.SYNC: Optimizes the signal from PC
8.SOURCE: Selects "Composite Video",
9.KEYSTONE: Adjusts image distortion caused by tilting the projector (+/- 12 degree)
10.ASPECT: Selects the aspect ratio.(4:3,16:9,1:1)
11.IMAGE MODE: Three modes can be selected. (Theater/Computer, Standard, User)
12.MENU: Displays the MENU of your playing device. Press once to display, twice to disappear.
Section B: RED characters, for MEDIA PLAYER use
13.PLAY and PAUSE: PLAY: Plays program PAUSE: Pauses the program.
When playing slideshow with music, press once to pause the slideshow, press again to pause the MP3 music.
14.MUSIC SLIDE: Plays slideshow with music
15.PHOTO: Plays the photos
16.PREV/RW
PREV: Selects the previous photo
RW: Rewinds the program
17.STOP: Stops the program
18.SETUP: Enters the OSD of the Media player. (If you are playing a program, please stop it first).
19.ROTATE: Rotates the photo (This function can't be executed when playing a slideshow)
20.NEXT and FW:
NEXT: Selects the previous photo
FW: Forward the program
21.INFORMATION : Shows the information (resolution) of the displaying photo.
22.SELECT: a. Selects the card you want when different cards are inserted simultaneously. b. Return to
뵢 뺩