Eiki LC-XT3 instruction manual Safety Instructions, Voor de klanten in Nederland

Page 3

SAFETY INSTRUCTIONS

All the safety and operating instructions should be read before the product is operated.

Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.

Do not expose this unit to rain or use near water... for

example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturers.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Slots and openings in the back and bottom of the cabinet are provided for ventilation, to insure reliable operation of the equipment and to protect it from overheating.

The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.

Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or frayed.

b.If liquid has been spilled into the projector.

c.If the projector has been exposed to rain or water.

d.If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.

e.If the projector has been dropped or the cabinet has been damaged.

f.When the projector exhibits a distinct change in performance-this indicates a need for service.

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.

Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.

Voor de klanten in Nederland

Bij dit product zijn batterijen geleverd.

Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Multimedia Projector Model LC-XT3Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compatibility Features and DesignName of Each Part of Projector PreparationSETTING-UP Projector Connecting AC Power CordFor U.S.A. and Canada For Continental Europe Preparation Lens Installation Lens Shift AdjustmentPositioning Projector Moving Projector Preparation Picture Level and Tilt AdjustmentConnecting Projector Replacement of TerminalTerminals of Projector AV Input VIDEO/Y, C Jacks Connecting Projector INPUT/OUTPUT Terminals and Jacks InputBNC Input Jacks Audio Input JacksJack Reset ButtonSerial Port Terminal Serial Port OUT TerminalTerminals Projector Connecting to ComputerTerminals Connecting to Video EquipmentSide Controls and Indicators Before OperationSide Controls Lamp Replace Indicator IndicatorsReady Indicator Lamp IndicatorLaser Pointer Function Operation of Remote ControlFocus Button Volume ButtonWired Remote Jack Zoom ButtonHOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Turning OFF Projector Basic OperationTurning on / OFF Projector Turning on ProjectorKeystone Adjustment Adjusting ScreenZoom Adjustment Focus AdjustmentTimer Function Basic Operation Picture Freeze FunctionNo Show Function Sound Menu Sound AdjustmentDirect Operation Menu OperationInput Computer InputSelecting Input Source Selecting Computer SystemPC System Menu Computer Input Automatic MULTI-SCAN SystemSelect Computer System Manually AutoResolution Computer Input Compatible Computer SpecificationsComputer Input PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Display area Display area HFull screen Image 1~4 Picture Image AdjustmentImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Input When Select Input 2 5 BNC TerminalPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System Video InputCinema Progressive scan Video Input Image Level AdjustmentColor TintProvides image at a normal video aspect ratio of 4 Setting Setting MenuSetting Menu To change code of Projector To change code of Remote Control UnitUSB Wireless Mouse modeProjector mode Lamp counter resetOperating Wireless Mouse Operating Wireless MouseMaintenance InstallationCleaning Projection Lens Appendix AIR Filter Care and CleaningYellow Lamp Dim Lamp Red Lamp Mark on Lamp Appendix Lamp ManagementFront Indicators Rear Indicators Appendix Lamp ReplacementLamp Handling Precautions Troubleshooting Function does not Remote Control UnitWireless Mouse Does not workTechnical Specifications DVI-I Terminal DIGITAL/ANALOG Appendix Configurations of TerminalsSerial Port IN/OUT Terminal Appendix Appendix Appendix Key to better communications Canada

LC-XT3 specifications

The Eiki LC-XT3 is a cutting-edge multimedia projector designed for a wide range of applications, including corporate presentations, educational environments, and home theater setups. This projector embodies a combination of advanced technology and user-friendly features, making it a versatile option for anyone in need of high-quality visual displays.

One of the standout features of the LC-XT3 is its impressive brightness rating of 5,500 ANSI lumens. This level of brightness ensures that images remain clear and vibrant even in well-lit environments, making it an ideal choice for conference rooms or classrooms where ambient light cannot be controlled. The projector also boasts a high contrast ratio of 10,000:1, which delivers deep blacks and vivid colors, enhancing overall image clarity.

It utilizes 3LCD technology, which is well-known for its ability to produce rich, accurate colors and sharp images. This technology works by projecting red, green, and blue light simultaneously, eliminating the rainbow effect often seen in single-chip projectors. This results in smoother, more natural color transitions, making it particularly advantageous for displaying detailed images or videos.

The LC-XT3 supports a range of resolutions, with WUXGA (1920 x 1200) being the native resolution, allowing for the projection of high-definition content. This projector also has the capability to handle 4K input signals, making it future-proof for users who wish to display ultra-high-definition content.

Connectivity is another area where the LC-XT3 excels. It features multiple input options, including HDMI, VGA, and USB ports, making it compatible with various devices, from laptops to streaming devices. This projector also includes a built-in wireless function, allowing for seamless presentations without the need for cumbersome cables.

For added convenience, the LC-XT3 comes equipped with an intuitive, user-friendly interface. It has a built-in speaker that provides adequate sound quality for presentations or small gatherings, while the included remote control allows for easy navigation of settings and features from a distance.

Durability is a key aspect of the Eiki LC-XT3, with a long lamp life of up to 20,000 hours in eco mode, ensuring lower maintenance costs and fewer interruptions during use. This makes it an economical choice for businesses and educational institutions alike.

In summary, the Eiki LC-XT3 is a powerful, versatile projector that meets the needs of various settings with its high brightness, excellent color accuracy, and extensive connectivity options. Its combination of advanced technology and user-friendly design positions it as a leading choice in the multimedia projector market.
Top Page Image Contents