Classe Audio CAP-2100 owner manual Rear Panel, Speaker Outputs, Single-ended RCA main outputs

2)'(4'30%!+%2

/540543

).0543

).0543

/540543

,%&%4&30%!+%2

/54054

/54054

-!).

4!0%

4!0%

,).% 

,).%.

,).% 

"!, 

"!, 

,).% 

,).% 

,).% 

4!0%

4!0%

-!).

0(/./

0(/./

/54054

).

/54

).

/54

/54

/54054

)2

42)''%2

).

#!.!"53

/54

23

Rear Panel

1Speaker Outputs

Two pairs of high quality five-way binding posts are provided on each channel of the integrated amplifier, in order to facilitate bi-wiring.

In practice, bi-wiring involves connecting two (preferably identical) sets of speaker cables between each amplifier channel and its corresponding loudspeaker. In many cases, the benefit is a subjectively improved level of clarity and detail from the speaker, as a result of being able to feed the two separate sections of its crossover and driver complement with identical, yet separate signals.

(Many high quality loudspeakers also offer two sets of connections on their speakers. Generally, one set of the connections on the loudspeaker feeds the portion of the speaker’s crossover network that supplies the woofer with its signal; the other set of connections connects to the portion of the crossover that supplies the rest of the speaker with the midrange and high frequencies.)

Although the binding posts on your Classé amplifier will accept bare wire connections, we strongly recommend the use of high quality spade or hook lugs, crimped and soldered onto the ends of your speaker wires. Using high quality connectors will ensure that your speaker connections do not gradually deteriorate from fraying and oxidizing bare wires. It also helps prevent accidental short-circuits from poorly-terminated connections.

2Single-ended (RCA) main outputs

Single-ended cables using RCA connectors are the most common form of analog connection used in consumer electronics. When implemented carefully and used with high quality interconnect cables, this standard can provide excellent performance.

15