Classe Audio CAP-2100 owner manual Input Selection, System Controls

Note:

3Input Selection

These Up and Down arrow keys will cycle through the active inputs on your CAP-2100.

If you have inputs you are not using, we suggest deactivating them in order to provide faster, easier access to the inputs you are actually using. (See the section The Menu System, the next section in this manual, for information on how to do this.)

4System Controls

The CAP-2100 remote control can also control user-defined functions as well as the volume and mute functions on a Classé system.

•F1/F2/F3/F4 keys are available for controlling aspects of the CAP-2100 not covered by the other buttons on the remote control. You are able to choose what the CAP-2100 should do in response to receiving the infrared signal that a particular Fkey has been pressed. The list of possible functions is quite extensive, and is found in the menu system (see the section The Menu System, the next section in this manual).

The Fkeys on all Classé remote controls issue the same infrared commands. This saves you from having to be sure you have picked up the proper remote, since all your Classé remotes will perform the same function for each Fkey.

•Volume Up, Volume Down, and Mute do what you would expect them to do.

•The Bal (balance) key takes you directly to the balance screen in the menu system; once there, you can use the navigation keys on the remote to select either the left or right buttons on the LCD touchscreen, depending on which way you wish to move the balance. Adjust the relative left-right balance of the system by using the Enter key on the remote to “press” the appropriate button on the display.

21