Eiki LC-SB22 owner manual To the Owner, Risk of Electric Shock Do not Open

Page 4

To the Owner

Before operating this projector, read this manual thoroughly and operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section in the end of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

NOTE: This symbol mark and recycle system are applied only to EU countries and not applied to the countries in the other area of the world.

Your EIKI product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-of- life, should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

Safety Precaution

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This projector produces intense light from the projection lens. Do not stare directly into the lens as much as possible. Eye damage could result. Be especially careful that children do not stare directly into the beam.

Install the projector in a proper position. If not, it may result in a fire hazard.

Provide appropriate space on the top, sides and rear of the projector cabinet for allowing air circulation and cooling the projector. Minimum clearance must be maintained. If the projector is to be built into a compartment or similarly enclosed, the minimum distances must be maintained. Do not cover the ventilation slot on the projector. Heat build- up can reduce the service life of your projector, and can also be dangerous.

SIDE and TOP

REAR

0.7'(20cm)

 

 

 

 

 

 

 

 

 

 

 

 

3'(1m)

 

 

 

 

 

1.5'(50cm)

 

 

 

 

1.5'(50cm)

If the projector is not to be used for an extended time, unplug the projector from the power outlet.

CAUTION ON HANGING FROM THE CEILING

When hanging the projector from the ceiling, clean air intake vents, air fil- ters, or top of the projector periodical- ly with a vacuum cleaner. If you leave the projector without cleaning for a long time, the dust will block the oper- ation of the cooling function, and it may cause a breakdown or a disaster.

DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PRE- VENT A BREAKDOWN OR A DISASTER. IF THE PROJECTOR COMES IN CONTACT WITH OIL OR CHEMI- CALS, IT MAY BECOME DETERIORATED.

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing Equipment

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

4

Image 4
Contents Model LC-SB22 Features and Design Compact Design Multilanguage Menu DisplayTable of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Installing the Projector in Proper PositionMoving the Projector Compliance Federal Communication Commission NoticeFront Part Names and FunctionsBack Bottom Rear Terminal Top Control Remote Control Point ed 78 Volume + / buttonsRemote Control Battery Installation Operating RangeAdjustable Feet InstallationPositioning the Projector Connecting the AC Power Cord Projector side AC outlet sideConnecting to a Computer Cables used for connectionConnecting to Video Equipment Connecting to Component Video Equipment Selected Input Source and Lamp Mode Basic OperationTurning On the Projector PIN Code Input Dialog BoxTurning Off the Projector How to Operate the On-Screen Menu Remote ControlTop Control On-Screen MenuMenu Bar PC System MenuZoom and Focus Adjustment Keystone CorrectionSound Adjustment Remote Control OperationKeystone button Computer Input Input Source SelectionInput Menu Source Select MenuComputer System Selection Selecting Computer System ManuallyAuto PC Adjustment To store adjustment parametersPC Adjust Menu Menu Operation Auto PC AdjManual PC Adjustment Reset Mode freeTo clear adjusted data To store adjusted dataImage Level Selection Image Level Adjustment Screen Size Adjustment Digital zoom + Digital zoomVideo Input Input Source Selection Video, S-VideoInput Source Selection Component, RGB Scart 21-pin ComponentVideo System Selection Video or S-Video AutoComponent Auto AV System Menu Video or S-VideoCinema Image1~4Color TintNoise reduction ProgressiveProvide the image at a normal video aspect ratio of 4 Setting SettingLogo select Logo Logo and Logo PIN code lock settingsCapture Logo PIN code lock Logo PIN code lock Dialog BoxPower management CeilingRear TerminalTo change the code for the remote control On startLamp control To change the code for the projectorKey lock Security Key lock and PIN code lock settingsPIN code lock Enter a PIN code Change the PIN code lock settingChange the PIN code Factory default Lamp counterMaintenance and Cleaning Then check the matters belowCleaning the Air Filters Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the lamp replacement counterLamp Replacement Counter When the Lamp replacementTroubleshooting AppendixAppendix Menu Tree Computer Input / Video InputVideo Input Setting Indicators and Projector Condition Projector ConditionCompatible Computer Specifications ON-SCREEN ResolutionTechnical Specifications Accessories Optional PartsConfigurations of Terminals USB Connector Series BTerminal Analog RGB Mini D-sub 15 pin Terminal Mini DIN 8-PINPIN Code Number Memo Logo PIN Code Lock NoKey to better communications Canada