Eiki LC-HDT10 instruction manual To the Owner

Page 2

TO THE OWNER

Before operating this projector, read this manual thoroughly and operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Trouble-shooting” section of the end of this booklet. If the problem still persists, contact the sales dealer where you purchased the projector or the service center.

SAFETY PRECAUTIONS

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This projector produces intense light from the projection lens. Do not stare directly into the lens as possible. Eye damage could result. Be especially careful that children do not stare directly into the beam.

This projector should be set in the way indicated. If not, it may result in a fire hazard.

Take appropriate space on the top, sides and rear of the projector

 

SIDE and TOP

 

REAR

 

cabinet for allowing air circulation and cooling the projector. 20cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Minimum distance should be taken. If the projector is to be built

 

 

 

 

 

 

 

 

 

 

into a compartment or similarly enclosed, the minimum distances

 

 

 

 

 

 

 

 

must be maintained. Do not cover the ventilation slot on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

projector. Heat build-up can reduce the service life of your

 

50cm

 

50cm

 

 

1m

 

 

 

 

 

 

projector, and can also be dangerous.

 

 

 

 

 

 

 

 

Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.

If the projector is not to be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

CAUTION

Not for use in a computer room as defined in the

Standard for the Protection of Electronic Computer/Data

Processing Equipment, ANSI/NFPA 75.

Ne puet être utillisé dans une salle d’ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for Protection of Electronic Computer/Data Processing Equipment

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

2

Image 2
Contents Model LC-HDT10 Multimedia ProjectorTo the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Color Systems Features and DesignComputers Component VideoPreparation Name of Each Part of ProjectorFor U.S.A. and Canada For Continental Europe SETTING-UP ProjectorConnecting AC Power Cord 200 240 V ACPositioning Projector Preparation Lens InstallationLens Shift Adjustment Preparation Picture Level and Tilt Adjustment Moving ProjectorTerminals of Projector Connecting ProjectorReplacement of Terminal Connecting Projector INPUT/OUTPUT Terminals and Jacks Input Input 2Connecting Projector Serial Port TerminalConnecting to Computer Terminals ProjectorExternal Audio Equipment Connecting to Video EquipmentProjector Audio Amplifier Audio Speaker stereoSide Controls Side Controls and IndicatorsBefore Operation Indicators Front IndicatorsOperation of Remote Control 1WIRED Remote JackNumber. Each time you press the Image button, the code is Number of times corresponding to each remote control codeWhile pressing the Menu button, press the Image button Flow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR System BOXTurning on Projector Basic OperationTurning on / OFF Projector Turning OFF ProjectorNo Show Function Adjusting ScreenPicture Freeze Function Menu Operation Sound AdjustmentDirect Operation Sound MenuRGBAnalog Selecting Input SourcePb/Cb, Pr/Cr RGBScartAuto System SelectAutomatic MULTI-SCAN System System MenuSystem Select Menu SDI Basic Operation Select Video SystemAuto System Select Menu Component videoScreen Adjustments Display AdjustDisplay Adjustments Screen Adjustment DirectDisplay Adjust Auto PC Adjustment Auto PC AdjDisplay Adjust Manual Display Adjustments Current mode ClampImage Level Select Direct Image AdjustmentsImage Adjust Menu Image Level Select MenuDisplay Adjust Image Level Adjustments Auto picture control Noise reductionProgressive scan Auto lamp controlSetting Menu SettingSetting Menu Ceiling Menu positionLogo RearRemote control To change the code of the Remote Control UnitPower management To change the code of ProjectorKey lock Lamp counter resetFactory default QuitIndicator MaintenanceAIR Filter Care and Cleaning AppendixMark on Lamp Appendix Lamp ManagementYellow Lamp Dim Lamp Red Lamp Appendix Lamp Replacement Front Indicators Rear IndicatorsCleaning Projection Lens Order Replacement LampTroubleshooting Does not work ServiceRemote Control Unit Indicators Projector Condition Appendix Indicators and Projector ConditionAppendix Menu Tree InputImage adjust Technical Specifications Appendix Configurations of Terminals Pin ConfigurationAppendix Compatible Computer Specifications ResolutionTerminal Board Y/C Type No Optional PartsHDB 15 pin-SCART 21 pin Cable Type No Terminal Board Faroudja Type NoKey to better communications Canada
Related manuals
Manual 52 pages 16.57 Kb

LC-HDT10 specifications

The Eiki LC-HDT10 is a high-performance laser projector designed to deliver stunning visuals for a variety of applications, including professional presentations, educational environments, and large venues. With its innovative technology and robust features, this projector is an ideal choice for those seeking a reliable projection solution.

One of the standout features of the Eiki LC-HDT10 is its advanced laser light source. This technology provides a bright and vibrant image with a light output of up to 10,000 lumens, making it suitable for both well-lit and dark environments. The laser source also contributes to the projector’s longevity, boasting a lifespan of up to 20,000 hours, significantly reducing the need for frequent lamp replacements and associated maintenance costs.

The LC-HDT10 offers a WUXGA resolution of 1920 x 1200, ensuring that images are sharp, clear, and detailed. This high resolution is particularly beneficial for displaying intricate graphics, detailed charts, and text-heavy presentations. The projector also supports 4K input, providing compatibility with modern devices and enabling high-quality content delivery.

Another key characteristic of the Eiki LC-HDT10 is its extensive connectivity options. It features a range of ports, including HDMI, USB, and 3G-SDI, allowing users to connect various devices seamlessly. This versatility makes it easy to integrate the projector into different setups, whether in a conference room, classroom, or large auditorium.

The projector's advanced display technologies, including 3LCD technology, ensure exceptional color accuracy and brightness uniformity. This translates to more lifelike images and makes the projector an excellent choice for applications where color fidelity is crucial, such as artistic displays or multimedia presentations.

In terms of user convenience, the Eiki LC-HDT10 is designed with ease of use in mind. It includes a built-in web management interface for remote control and monitoring, simplifying projector management in large setups. The projector is also equipped with a lens shift feature, which provides flexibility in installation, allowing for adjustments without distorting the image.

Overall, the Eiki LC-HDT10 is a powerful laser projector packed with advanced features and technologies that elevate the projection experience. Its high brightness, resolution, extensive connectivity options, and ease of use make it a top choice for professionals looking for a versatile and reliable projection solution.