Eiki LC-XB40N owner manual Basic Operation Turning Off the Projector

Page 23

Basic Operation

Turning Off the Projector

1

Press the ON/STAND-BY button on the top control or on

 

 

 

 

 

the remote control, and “Power off?” appears on the

 

 

 

 

 

screen.

 

 

 

 

2

Press the ON/STAND-BY button again to turn off the

 

 

 

 

 

 

 

 

 

 

 

 

 

projector. The POWER indicator starts to blink red, and

 

 

 

 

 

the cooling fans keep running. (You can select the level

 

 

 

 

 

of fans’ quietness and speed. See “Fan” on page 56.)

 

 

 

 

 

“Power off?” disappears after 4 seconds.

 

At this time, you can unplug the AC power cord even if

 

the fans are still running.

 

 

 

 

3

When the projector has cooled down enough, the

 

 

 

 

 

POWER indicator stops blinking and you can turn on

 

 

 

 

the projector. After it is cooled down completely, unplug the AC power cord.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT

LEAST FIVE MINUTES BEFORE TURNING IT OFF.

Notes:

•When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.53).

•Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and let stand for about an hour in every 24 hours.

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING indicator blinks or lights red, see “Warning Indicators” on page 62.

•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

23

Image 23
Contents Memory Viewer Network SupportedPage Compact Design Logo Function Features and DesignTable of Contents Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsMoving the Projector Safety Instructions Air CirculationPositioning Precautions Compliance AC Power Cord for the United States and CanadaBottom Part Names and FunctionsFront BackPart Names and Functions Rear Terminal Part Names and Functions Top Control Wired Remote jack Part Names and Functions Remote ControlSpotlight Pointer Part Names and Functions Laser Pointer FunctionPointer Function Remote Control Code Part Names and Functions Wireless Mouse OperationAdjustable Feet Remote Control Operating RangePositioning the Projector InstallationProjector side AC outlet side Installation Connecting the AC Power CordCables used for connection Installation Connecting to a ComputerSee page 75 for ordering optional cables Installation Connecting to Video EquipmentInstallation Connecting to Component Video Equipment PIN Code Input Dialog Box Basic OperationTurning On the Projector Selected Input Source and Lamp ControlBasic Operation Turning Off the Projector On-Screen Menu Basic Operation How to Operate the On-Screen MenuRemote Control Top ControlFor video source Basic Operation Menu BarFor computer source Keystone Correction Basic Operation Zoom and Focus AdjustmentAuto Setup Function Menu Operation Basic Operation Sound AdjustmentDirect Operation COMPUTER/VIDEO/NETWORK button Basic Operation Remote Control OperationNo Show button Basic OperationTop Control Computer InputInput Source Selection RGB Computer 1 Analog/Computer Input Source Selection RGB PC digital, RGB AV Hdcp Computer InputPC System Menu Computer Input Computer System SelectionSelecting Computer System Manually Auto PC Adj Computer Input Auto PC AdjustmentPC Adjust Menu To store adjustment parametersComputer Input Manual PC Adjustment To store adjusted data To clear adjusted data parametersComputer Input Image Mode Selection Computer Input Image Adjustment Wide Screen Size AdjustmentNormal TrueDigital zoom CustomDigital zoom + Auto Top Control Remote ControlVideo Input Input Source Selection Video, S-videoSource Select Menu Component RGB ScartAV System Menu Video or S-Video Video Input Video System SelectionVideo or S-Video ComponentImage1-4 Video Input Image Mode SelectionCinema Tint Video Input Image AdjustmentColor Progressive Video InputNoise reduction Custom Screen Menu Video Input Screen Size AdjustmentAuto setup SettingSetting Display KeystoneBlue back Capture Logo Logo and Logo PIN code lock settingsLogo select Capture Logo selectLogo PIN code lock Change the Logo PIN code lock settingEnter a Logo PIN code Change the Logo PIN codeInput search Ceiling Rear CeilingRear Power management Power managementStandby mode Pointer PIN code lock Security Key lock, PIN code lock, Alarm settingsKey lock Key lockChange the PIN code Change the PIN code lock settingAlarm Enter a PIN codeLamp counter FanFan Fan controlFilter counter Factory defaultFactory default Filter counterRelease the alarm setting Antitheft Alarm FunctionHow to Use the Antitheft Alarm Function Set the alarmChange the PIN code Antitheft Alarm FunctionRear Terminal Reset the settings Alarm operating configurationCharge the built-in batteries Safety Precautions for Ni-MH Battery Pack Then check the matters below Maintenance and CleaningResetting the Filter Counter Maintenance and Cleaning Cleaning the FilterCleaning the Projector Cabinet Maintenance and Cleaning Slide ShutterCleaning the Projection Lens Service Parts No 331 Maintenance and Cleaning Lamp ReplacementReset the lamp counter Maintenance and Cleaning Resetting the Lamp Counter Lamp Handling PrecautionsAppendix TroubleshootingPIN code dialog box appears at start-up AppendixSound Appendix Menu TreeComputer Input/Video Input Setting Video Input SettingProjector Condition Appendix Indicators and Projector ConditionON-SCREEN Resolution Appendix Compatible Computer Specifications31.47 59.94 Appendix Technical Specifications Optional Parts AccessoriesAppendix PJ Link Notice Terminal Analog RGB Mini D-sub 15 pin Appendix Configurations of TerminalsUSB Connector Series a USB Connector Series BAppendix PIN Code Number Memo Alarm PIN Code NoKey to better communications Canada

LC-XB40N specifications

The Eiki LC-XB40N is a high-performance projector designed for a variety of applications, including corporate presentations, educational settings, and larger venues. This robust device excels in delivering vivid and crisp images, making it a preferred choice for professionals seeking quality projection solutions.

At the heart of the Eiki LC-XB40N is its impressive brightness level, which typically exceeds 4,000 ANSI lumens. This high lumen output ensures that images remain sharp and bright even in well-lit environments, allowing for effective presentations without the need to dim the lights. The projector features a native XGA resolution of 1024 x 768 pixels, which is standard for most business applications, supporting a clear and detailed visual experience.

One of the standout technologies in the Eiki LC-XB40N is its advanced 3LCD projection system. This technology enhances color accuracy and consistency, reducing the risk of color distortions that can occur in other projection methods. The result is vibrant colors and realistic images, which are particularly beneficial for multimedia presentations that involve photographs or video content.

In addition to its impressive visuals, the Eiki LC-XB40N is built for convenience and flexibility. It offers a range of connectivity options, including HDMI, VGA, and composite inputs, allowing it to connect seamlessly with various devices such as laptops, desktops, and DVD players. The HDMI interface, in particular, supports high-definition content, which is essential for modern presentations.

The projector also incorporates a long lamp life, often rated at up to 5,000 hours in eco mode. This reduces the frequency of lamp replacements and lowers overall maintenance costs, making it a cost-effective choice for organizations. Furthermore, the Eiki LC-XB40N features a comprehensive set of image adjustment tools, including keystone correction and lens shift capabilities, ensuring that images are perfectly aligned and projectors can be set up in diverse environments.

Overall, the Eiki LC-XB40N stands out with its powerful performance, advanced projection technologies, and user-friendly features, making it a reliable option for anyone in need of a high-quality projection solution for professional settings. Its combination of brightness, color accuracy, and flexible connectivity ensures that it meets the needs of today’s dynamic presentation environments.