Eiki LC-XB40N owner manual Maintenance and Cleaning Lamp Replacement, Reset the lamp counter

Page 65
Connect the AC power cord to the projector and turn on the projector.
Turn off the projector and unplug the AC power cord. Let the projector cool for at least 45 minutes.
Open the lamp cover.
Remove the two (2) screws that secure the lamp. Lift the lamp out of the projector by using the handle.

Maintenance and Cleaning

Lamp Replacement

When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode.

WARNING:

TURN OFF THE UV LAMP BEFORE

OPENING THE LAMP COVER

Top Control

LAMP REPLACE indicator

Lamp replacement icon

Note:

•The Lamp replacement icon will not appear when the Display function is set to “Off” (p.48), during “Freeze” (p.28), or “No show” (p.29).

CAUTION

Allow a projector to cool for at least 45 minutes before you open the Lamp cover. The inside of the projector can become very hot.

CAUTION

For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass bulb! The glass can shatter and may cause injury.

Lamp Cover

Press here and pull upward.

Follow these steps to replace the lamp.

1

2

3

4 Replace the lamp with a new one and secure the two

(2)screws. Make sure that the lamp is set properly. Close the lamp cover.

5

6 Reset the lamp counter.

See “Resetting the Lamp Counter” on the next page.

Screw

Handle

Screw

Lamp

ORDER REPLACEMENT LAMP

Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer.

Model No. of your projector

: LC-XB40N

Replacement Lamp Type No.

: POA-LMP103

 

 

(Service Parts No. 610 331 6345)

65

Image 65
Contents Memory Viewer Network SupportedPage Compact Design Logo Function Features and DesignTable of Contents Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsMoving the Projector Safety Instructions Air CirculationPositioning Precautions Compliance AC Power Cord for the United States and CanadaFront Part Names and FunctionsBack BottomPart Names and Functions Rear Terminal Part Names and Functions Top Control Wired Remote jack Part Names and Functions Remote ControlSpotlight Pointer Part Names and Functions Laser Pointer FunctionPointer Function Remote Control Code Part Names and Functions Wireless Mouse OperationAdjustable Feet Remote Control Operating RangePositioning the Projector InstallationProjector side AC outlet side Installation Connecting the AC Power CordCables used for connection Installation Connecting to a ComputerSee page 75 for ordering optional cables Installation Connecting to Video EquipmentInstallation Connecting to Component Video Equipment Turning On the Projector Basic OperationSelected Input Source and Lamp Control PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Remote Control Basic Operation How to Operate the On-Screen MenuTop Control On-Screen MenuFor video source Basic Operation Menu BarFor computer source Keystone Correction Basic Operation Zoom and Focus AdjustmentAuto Setup Function Menu Operation Basic Operation Sound AdjustmentDirect Operation COMPUTER/VIDEO/NETWORK button Basic Operation Remote Control OperationNo Show button Basic OperationTop Control Computer InputInput Source Selection RGB Computer 1 Analog/Computer Input Source Selection RGB PC digital, RGB AV Hdcp Computer InputPC System Menu Computer Input Computer System SelectionSelecting Computer System Manually PC Adjust Menu Computer Input Auto PC AdjustmentTo store adjustment parameters Auto PC AdjComputer Input Manual PC Adjustment To store adjusted data To clear adjusted data parametersComputer Input Image Mode Selection Computer Input Image Adjustment Normal Screen Size AdjustmentTrue WideDigital zoom CustomDigital zoom + Video Input Top Control Remote ControlInput Source Selection Video, S-video AutoSource Select Menu Component RGB ScartVideo or S-Video Video Input Video System SelectionComponent AV System Menu Video or S-VideoImage1-4 Video Input Image Mode SelectionCinema Tint Video Input Image AdjustmentColor Progressive Video InputNoise reduction Custom Screen Menu Video Input Screen Size AdjustmentAuto setup SettingSetting Display KeystoneBlue back Logo select Capture Logo Logo and Logo PIN code lock settingsLogo select CaptureEnter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code Logo PIN code lockInput search Ceiling Rear CeilingRear Power management Power managementStandby mode Pointer Key lock Security Key lock, PIN code lock, Alarm settingsKey lock PIN code lockAlarm Change the PIN code lock settingEnter a PIN code Change the PIN codeFan FanFan control Lamp counterFactory default Factory defaultFilter counter Filter counterHow to Use the Antitheft Alarm Function Antitheft Alarm FunctionSet the alarm Release the alarm settingRear Terminal Reset the settings Antitheft Alarm FunctionAlarm operating configuration Change the PIN codeCharge the built-in batteries Safety Precautions for Ni-MH Battery Pack Then check the matters below Maintenance and CleaningResetting the Filter Counter Maintenance and Cleaning Cleaning the FilterCleaning the Projector Cabinet Maintenance and Cleaning Slide ShutterCleaning the Projection Lens Service Parts No 331 Maintenance and Cleaning Lamp ReplacementReset the lamp counter Maintenance and Cleaning Resetting the Lamp Counter Lamp Handling PrecautionsAppendix TroubleshootingPIN code dialog box appears at start-up AppendixSound Appendix Menu TreeComputer Input/Video Input Setting Video Input SettingProjector Condition Appendix Indicators and Projector ConditionON-SCREEN Resolution Appendix Compatible Computer Specifications31.47 59.94 Appendix Technical Specifications Optional Parts AccessoriesAppendix PJ Link Notice USB Connector Series a Appendix Configurations of TerminalsUSB Connector Series B Terminal Analog RGB Mini D-sub 15 pinAppendix PIN Code Number Memo Alarm PIN Code NoKey to better communications Canada

LC-XB40N specifications

The Eiki LC-XB40N is a high-performance projector designed for a variety of applications, including corporate presentations, educational settings, and larger venues. This robust device excels in delivering vivid and crisp images, making it a preferred choice for professionals seeking quality projection solutions.

At the heart of the Eiki LC-XB40N is its impressive brightness level, which typically exceeds 4,000 ANSI lumens. This high lumen output ensures that images remain sharp and bright even in well-lit environments, allowing for effective presentations without the need to dim the lights. The projector features a native XGA resolution of 1024 x 768 pixels, which is standard for most business applications, supporting a clear and detailed visual experience.

One of the standout technologies in the Eiki LC-XB40N is its advanced 3LCD projection system. This technology enhances color accuracy and consistency, reducing the risk of color distortions that can occur in other projection methods. The result is vibrant colors and realistic images, which are particularly beneficial for multimedia presentations that involve photographs or video content.

In addition to its impressive visuals, the Eiki LC-XB40N is built for convenience and flexibility. It offers a range of connectivity options, including HDMI, VGA, and composite inputs, allowing it to connect seamlessly with various devices such as laptops, desktops, and DVD players. The HDMI interface, in particular, supports high-definition content, which is essential for modern presentations.

The projector also incorporates a long lamp life, often rated at up to 5,000 hours in eco mode. This reduces the frequency of lamp replacements and lowers overall maintenance costs, making it a cost-effective choice for organizations. Furthermore, the Eiki LC-XB40N features a comprehensive set of image adjustment tools, including keystone correction and lens shift capabilities, ensuring that images are perfectly aligned and projectors can be set up in diverse environments.

Overall, the Eiki LC-XB40N stands out with its powerful performance, advanced projection technologies, and user-friendly features, making it a reliable option for anyone in need of a high-quality projection solution for professional settings. Its combination of brightness, color accuracy, and flexible connectivity ensures that it meets the needs of today’s dynamic presentation environments.