Eiki LC-XB23 owner manual Input Source Selection Component, RGB Scart 21-pin

Video Input

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation

Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

TOP CONTROL

	POWER	WARNING	LAMP R
ON	MENU	INPUT	KEYS
-			TO
OFF
	SELECT
			+

- V

INPUT button

INPUT button

Computer 1

Computer 2

Video

✳

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Press the Point 7 8 buttons to move the red
	framed pointer to the Input Menu icon.
2	Press the Point ed buttons to move the red arrow
	pointer to Computer 1 and then press the SELECT
	button.
3	After the Source Select Menu appeared for Computer
	1, move the pointer to Component or RGB(Scart) and
	then press the SELECT button.
		When the input source is coming from
Component
		video equipment connected to the
		COMPUTER IN 1 / COMPONENT IN
		terminal with a Component-VGA Cable,
		select Component.

REMOTE CONTROL

COMPUTER button

COMPUTER button

Computer 1

Computer 2 ✳

✳See Note at the bottom of this page.

Input Menu Input Menu icon

Move the pointer (red arrow) to Computer 1 and press the SELECT button.

Computer

1

Source Select Menu

Move the pointer to Component or RGB(Scart) and press the SELECT button.

RGB (Scart)

When the input source is coming from video equipment connected to the

COMPUTER IN 1 / COMPONENT IN terminal with a Scart-VGA Cable, select RGB (Scart).

Video Input

35