Total lines
The number of the total vertical lines. Adjust the number to match the image of your personal computer.
Total dots
The number of the total dots in one horizontal period. Adjust the number to match the image of your computer.
Horizontal / Vertical
Adjustment of the horizontal or vertical picture position. When the image is not centered on the screen, adjust each of those items.
Clamp
Adjustment of the clamp level. When the image has a dark bar(s), try this adjustment.
Fine sync
Adjust the picture as necessary to eliminate flicker from the display.
Display area
Adjustment of the area displayed with this projector. Select the resolution at the Display area dialog box, or adjust the number at the column of “H” or “V” to match the resolution of the image.
Horizontal Scale / Vertical Scale
Adjustment of the horizontal height or vertical width of the image.
NOTE : The Display area, the Horiz. scale and the Vert. scale cannot be adjusted when “HDTV1035i” or “HDTV1080i” is selected on the SYSTEM MENU (P24 and 25).
Each of the keys operates as follow.
Reset | Recalls the parameter data that was previously |
| adjusted. |
Mode free 
Clears the parameter data previously set.
Stored | Stores the parameters in the memory. |
|
|
Quit | Closes the PC ADJUST Menu. |
COMPUTER MODE
Press the SELECT (REAR CLICK) button at this column to adjust “Clamp,” “Fine sync,” “Display area,” “Horiz. scale” or “Vert. scale” .
Point the arrow at the Display area and press the SELECT (REAR CLICK) button. The Display area dialog box appears.
39