Eiki LC-UXT1 Adjusting Screen, Zoom Adjustment, Focus Adjustment, Keystone Adjustment

BASIC OPERATION

ADJUSTING SCREEN

ZOOM ADJUSTMENT

1	Press ZOOM ▲/▼ button on Side Control or on Remote Control
	Unit. Message “Zoom” is displayed.
2	Press ZOOM ▲ button to make image larger, and press ZOOM
	▼ button to make image smaller.

Zoom

Message disappears after 4 seconds.

FOCUS ADJUSTMENT

1	Press FOCUS ▲/▼ button on Side Control or on Remote Control
	Unit. Message “Focus” is displayed.
2	Adjust focus of image by pressing FOCUS ▲/▼ button(s) .

Focus

Message disappears after 4 seconds.

LENS SHIFT ADJUSTMENT

1	Press the LENS SHIFT button on Side Control or on the Remote
	Control Unit. Message “Lens shift” is displayed.
2	Press POINT UP button to move image up, press POINT DOWN
	button to move image down, press POINT LEFT to move image

left and press POINT RIGHT to move image right.

�

Lens shift

�

�

Message disappears after 4 seconds.

KEYSTONE ADJUSTMENT

If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.

1	Press KEYSTONE ▲/▼ button on Remote Control Unit or select
	Keystone on SETTING menu. (Refer to page 40.) Keystone
	dialog box appears.
2	Correct keystone distortion by pressing KEYSTONE ▲/▼ button
	or POINT UP/DOWN button(s). Press KEYSTONE ▲ button or

POINT UP button to reduce upper part of image, and press KEYSTONE ▼ button or POINT DOWN button to reduce lower part.

Reduce upper width with KEY STONE ▲ button or POINT UP button.

Reduce lower width with KEY STONE ▼ button or POINT DOWN button.

23