Konica Minolta C650 manual Color Image Adjust

Page 95

Using fax/scan functions Chapter 3

 

3

Using fax/scan functions

 

 

If “Single Page” is selected under “Scan Setting”, a file is created in a format where the data for each page can be saved when downloading.

If “Multi Page” is selected under “Scan Setting”, a single file is created from the entire scanned document. This setting cannot be selected when “File Type” is set to “JPEG”.

4

Touch [OK], and then touch [OK] in the next screen that appears.

Otherwise, touch [Main Screen].

Color (Image Adjust)

Select whether the document will be scanned in color or black and white.

The following Color settings are available.

Setting

Description

Auto Color

Select this setting to automatically detect the color of the

 

document and scan it with the corresponding setting.

 

 

Full Color

Select this setting to scan in full color.

 

 

Gray Scale

Select this setting for documents with many halftones, such as

 

in black-and-white photos.

 

 

Black

Select this setting for documents with distinct black and white

 

areas, such as in line drawings.

 

 

Some Color settings may not be available, depending on the selected File Type setting.

Note

For fax transmissions and Internet fax transmissions, the color is fixed to 2 color of black and white.

1

Touch [Scan Settings] in the Fax/Scan mode screen.

3-24

C650

Image 95
Contents User’s Guide Enlarge Display Operations Explanation of manual conventions IntroductionC650 Contents General fax/scan operation Specifying a destination Selecting Finishing settingsUsing a program Checking the destinations Logging on and logging off When a logon screen appearsC650 Before use Names of control panel parts and their functions Before useBefore use Control panel Adjusting the angle of the control panelTo adjust the angle of the control panel Then tilt the panel to the left Press the Enlarge Display key in the control panel Screens in Enlarge Display modeDisplaying screens in Enlarge Display mode Desired screenDetail Icons that appear in the screen Touch panelTouch panel operation Paper type icons Paper type icons that appear Paper supply icons Slide the lateral guides against the edges of the document Feeding the documentLoading the document into the ADF With the side to be scanned faces upClose the ADF Placing the document on the original glassFaces down Lift open the ADFCopying documents of mixed sizes Mixed Original setting Specifying document settingsMain screen, touch the Original/Density tab Position the document to be copied Loading folded documents Z-Folded Original settingTouch Mixed Original Touch Z-Folded Original Original/Density tab Basic screen, touch Duplex/Combine. Otherwise, touchTouch OK Touch Original DirectionFrom the Original/Density screen Basic screen, touch Duplex/Combine. Otherwise touch Duplex/Combine screen, touch Original Binding Pos Before use Chapter Using copy functions Display key Specify the desired copy settingsGeneral copy operation Press the Start key Using the keypad, type in the desired number of copiesBasic screen, touch Color Selecting a Color settingSelect the desired Color setting Basic screen, touch Paper Selecting the Paper settingsAutomatically selecting the paper size Auto Paper setting Touch Auto Manually selecting the desired paper size Select the paper tray loaded with paper of the desired size Zoom ratio can be specified in any of the following ways Specifying a Zoom settingBasic screen, touch Zoom Selecting a zoom ratioTouch the button for the desired zoom ratio Be printed as desired Selecting document and copy settingsDocument orientation Original Direction settings on Not be printed as desiredBasic screen, touch Duplex/Combine Selecting single-sided or double-sided copiesTouch Original Copy Touch Close Touch the button for the desired settings, and then touch OKTouch Combine Selecting a combined copy settingTouch 2in1, and then touch OK Selecting Finishing settings Basic screen, touch Finishing Select the desired Finishing settingsSelecting the finishing method Touch Staple/Punch Selecting Staple/Punch settingsSelect the desired position SettingOtherwise, touch Main Screen Touch Fold/Bind Selecting a folding or binding settingSelect the desired settings Touch OK, and then touch OK in the next screen that appears Selecting not to rotate the image Selecting the quality of the document Loaded document Touch the Original/Density tabTouch Original Type Original/Density screen appears again Touch Density Selecting the density settingsSelect the desired Density setting Adjusting the background density Background Removal settingsTouch Background Removal Select the desired Background Removal settingSelecting a Paper Type setting Touch Paper Type SettingsTouch the button for the bypass tray, and then touch Change Printing double-sided copies manually LoadedBasic screen, touch Paper Touch Paper Type Selecting a Paper Size setting Touch the button for the bypass tray, and then touch Change Touch either Auto Detect or select the desired paper size Touch Paper SizeOtherwise, touch Main Screen After the current job is finished, the next copy job begins Specified for the next copy jobPress the Start key Being printed Pausing scanning/printingCheck the proof copy Printing a proof to check the settings Proof CopySelect the desired copy settings Press the Proof Copy keyTouch Print Using fax/scan functions General fax/scan operation Using fax/scan functionsSpecify the destination Specify the necessary scanning settingsDetail Network Fax operations Specifying a destinationFax operations Address Book screen, touch Other Dest Selecting a destination from the address bookTouch the button for the desired destination type Touch Close Selecting a destination from the job logTouch the Job History tab Select the desired destination Selecting a destination with an Ldap searchTouch the Address Search tab Select the search method Specify the search conditions, and then touch Start SearchTouch Fax Number Directly typing in the numberPanel, type in the fax number Touch OK Simplex/Duplex Specifying scanning settings Scan SettingsTouch Scan Settings in the Fax/Scan mode screen Touch Simplex/Duplex Select the scanning methodOriginal Type Touch Original Type Resolution Touch Resolution Select the resolutionDensity Touch Scan Settings in the Fax/Scan mode screenXPS File TypeTouch File Type Select the file format and the page settingColor Image Adjust Select the color type Touch Image AdjustTouch Image Adjust Background Removal Image AdjustAdjust the density as desired Touch Scan Size Scan SizeSelect the desired size and orientation Original SettingsSelect the binding position and orientation of the document These functions can be used togetherTouch Original Settings Select the document settings Touch the button for the desired program Using a programTouch OK or Main Screen Checking the destinations Fax/Scan mode screen, touch Dest. SettingsTouch Details, and then check the destination details Using fax/scan functions Chapter Logging on and logging off Touch User Name When a logon screen appearsWhen the screen to enter the user name appears Touch panel, type in the user name, and then touch OK Using the control panel keypad or the keyboard that appearsTouch Password Touch panel, type in the password, and then touch OKTouch Login or press the Access key Touch Yes, and then touch OK Access keyTouch Account Name Touch panel, type in the account name, and then touch OKTouch panel, type in the password, and then touch OK Touch Yes, and then touch OK Http//konicaminolta.com
Related manuals
Manual 165 pages 59.05 Kb