Intel 9545 Regulatory Information, Industry Canada Notice, Approvals, Interface, Jack Type

Page 17
Interface

Regulatory Information

This equipment uses the following USOC jacks and codes:

Interface

Facility Interface Code

Service Order Code

Jack Type

 

ISDN BRI ST

02IS5

6.0N

NA

 

ISDN BRI ST

02IS5

6.0N

RJ49C

 

 

 

 

 

Industry Canada Notice

IC CS-03 NOTICE (Canada)

The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The department does not guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or electrical malfunctions, may give the telecommunications

company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be

particularly important in rural areas.

Caution

Users should not attempt to make such electrical connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate.

The standard connecting arrangements (telephone jack type) for this equipment are CA-A11 and CB-1D.

Approvals

The Express Router complies with the following requirements:

Safety

UL 1950

 

CSA-C22.2 No. 950

 

IEC950

 

EN 60950

Telecommunications

FCC part 68

 

IC CS-03

Emission

FCC part 15 Class A,

 

EN 55022 Class A

 

CISPR 22 Class A

Susceptibility

EN 55024

 

CISPR 24

CE Mark

No

15

Image 17
Contents Quick Start Intel Express 9545 RouterA22130-001 First EditionApril Contents Install the Router 1 Hardware Quick StartConnect to your WAN Services Connect the PowerFigure 3. Intel Device View Installation. Choose 2 InstallView Intel DeviceFigure 4. Access Intel Device View for Web from Intel Device2Click Next 3 Install the Router in Intel Device ViewTo Configure the Router 4 Configure the RouterConfiguration Tips For ISDN Configuration WorksheetFor IDSL ISDN Digital Subscriber Line General for all connection typesLocal DLCI between 16 and For HDSL2For X.25 connections only Window Size between 1 andBridging if using bridging IP Routing Type if using IPIPX Routing on the WAN if using IPX LAN IP Address of routerYour WAN connection IP address is This is the ISDN number of your service providerIP address assigned to you by the ISP Color LED IndicatorsMeaning StatusAll LEDs HDSL2To Access Local Management Remotely using Telnet Local Management optionalTo Install Acrobat Reader Viewing Online ManualsTo Install Internet Explorer Manuals on the Intel Device View CDPower supply wiring color code Regulatory InformationStatutory Notices & Warnings FCC StatementsIndustry Canada Notice SafetyApprovals Interface