Remote control
The 640R is supplied with an Azur Navigator remote control. Insert the supplied AAA batteries to use. For full details of the various adjustment functions available from the remote, refer to the later sections of this manual.
Standby/On
Switches the unit between Standby mode and On.
Analog Direct
Directly selects a stereo analog input for the current source with no A/D conversion or DSP processing.
Stereo Modes
Selects Stereo or Stereo + Sub modes for Analog or Digital sources (digitally processed).
PLIIx/Neo/DSP
Selects from various matrix encoded surround processing modes for analog or digital sources (digitally processed).
DD EX/DTS ES
Selects digital surround processing modes for Digital sources only.
Dynamic
Press repeatedly to reach the desired dynamic compression range (Dolby Digital or DTS modes only).
Sub On/Off
Press to turn on/off the output of the subwoofer. Also, hold down and then press the volume up and down buttons to adjust the overall sub level if desired.
PTY (Program Type Search)
Press to search by program type when in Tuner mode. Refer to the ‘Operating instructions’ section of this manual for more information.
APS (Auto Program Search)
Hold down for 4 seconds to allocate and memorise radio stations automatically.
Display
Press to view the current source material and decoding mode. When listening to FM with RDS, press to cycle round various RDS information modes.
Stereo Mono
When listening to FM, press to alternate between stereo and mono modes.
Store
Press to store the current frequency when in Tuner mode.
Mode
Press to select Auto/Manual or Preset tuning when in Tuner mode.
Mute
Mutes the audio on the AV Receiver. Press again to cancel mute.
Volume
Increase or decrease the volume of the AV receiver output. Also used as up/down in the OSD setup menus.
Analog | Stereo | PL IIx | |
Direct | Modes | Neo/DSP | |
DD EX | Dynamic | Sub | |
DTS ES | On/Off | ||
| |||
PTY | APS | Display | |
Stereo | Store | Mode | |
Mono | |||
|
|
Vol
Enter
Vol
| Bass | 7.1 | |
| Treble | Direct | |
Audio In |
| Video In | |
Type |
| Type | |
Tuner | DVD | Video 1 | |
AM/FM | |||
|
| ||
Video 2 | Rec 1 | Aux | |
CD |
| Rec 2 |
Tune / Left & Right
Press the right arrow to increase tuner frequency/change preset. Press the left arrow to decrease tuner frequency/change preset. Also used to scroll left/right in the OSD setup menus.
Enter
Used in the OSD setup menus.
On-Screen Display (OSD)
Press to turn on and off the
Bass/Treble
Press for bass/treble adjustment, using the Volume up/down buttons. Note: Bass/Treble is disabled in analog stereo direct and 7.1 direct modes.
7.1 Direct
Selects the 5.1/6.1/7.1 direct input.
Audio In Type
Switches the 640R between analog and digital inputs for the currently selected source.
Video In Type
Selects Composite video,
Tuner AM/FM, DVD, Video 1, Video 2, Rec 1, Aux, CD, Rec 2
Press the corresponding button to change the input source. Pressing the Tuner AM/FM button a second time toggles between AM and FM modes.
The above button descriptions are naturally brief. Please refer to the ‘Operating Instructions’ section of this manual for more information on the relevant functions implemented.
8