4.5.14 UR2 Duplex Mode
This item allows you to select the IR half/full duplex funcion. The choices: Half, Full.
4.5.15 Onboard Parallel Port
This field sets the address of the
4.5.16 Parallel Port Mode
This field allows you to set the operation mode of the parallel port. The setting “Normal” allows normal speed operation, but in one direction only. “EPP” allows bidirectional parallel port operation at maximum speed. “ECP” allows the parallel port to operate in
4.5.17 EPP Mode Select
This field allows you to select EPP port type 1.7 or 1.9. The choices: EPP1.7, 1.9.
4.5.18 ECP Mode Use DMA
This selection is available only if you select “ECP” or “ECP + EPP” in the Parallel Port Mode field. In ECP Mode Use DMA, you can select DMA channel 1, DMA channel 3, or Disable. Leave this field on the default setting.
35 | Chapter4 |