Intel PM915-478, PM915P-478 manual Standard Cmos Features

Page 10

— Load Fail-Safe Defaults

Setup the default values in system — Load Optimized Defaults

Setup the best performance values in system — Set Supervisor Password

Setup supervisor password in system — Set User Password

Setup user password in system — Save & Exit Setup

Setup save and exit, press Y to save and exit — Exit Without Save Setup

Setup without save and exit, press N to without save and exit

5.2 Standard CMOS Features

— Date(mm:dd:yyyy)

These items set up system date

— Time(hh:mm:ss)

These items set up system time

— Primary/Secondary Master/Slave

These items configure devices connected to the Primary and Secondary IDE channels. To configure an IDE hard disk drive, choose Auto. If the Auto setting fails to find a hard disk drive, set it to User, and then fill in the hard disk characteristics manually. If you have a CD-ROM drive, select the setting CD-ROM. If you have an ATAPI device with removable media, select Floptical.

— Drive A/B

— Video

— Halt On

8

Image 10
Contents PM915-478 PM915P-478 Date:2009.1 Contents Key Features: -Chipset: IntroductionPackage Contents Mainboard Locations Installation Connectors Bios SetupFunction Port Panel Main menu Standard Cmos Features Advanced Bios Features — Total MemoryAdvanced Chipset Features IDE Primary/ Secondary Master/Slave Udma Default:Auto Default p1,p3 is Secondary Default:3F8/IRQ4/2F8/IRQ4 Set Supervisor Password &Set User Password