Konica Minolta IC-205 manual Installing the printer driver

Installing the printer driver Chapter 4

4 Installing the printer driver

4.2Installing the TWAIN driver/printer driver using “Plug and Play”

Installation using “Plug and Play” is not possible on Windows 98 and NT 4.0. Refer to the procedure for using the “Add Printer Wizard”.

Note

If the printer driver is installed using Plug and Play, first the TWAIN driver is installed, and then installation of the printer driver begins. This manual describes the installation of the TWAIN driver followed by that of the printer driver.

Installing the TWAIN driver/printer driver using “Plug and Play” under Windows XP/Server 2003

1 With Windows running, insert the CD-ROM into your computer’s CD- ROM drive.

2 Turn on the machine.

3 When the machine is ready, connect it to the computer with the USB cable.

The “Found New Hardware Wizard” dialog box appears. First, install the TWAIN driver.

When using Windows XP (SP2), select do not connect. in the “Found New Hardware Wizard” dialog box, and then click [Next].

4 Select Install from a list or specific location Advanced, and then click [Next].

5 Select Include this location in the search: under Search for the best driver in these locations., and then click [Browse].

6 Browse to “Driver\(language)\2k_XP” on the CD-ROM, and then click [OK].

Select the language you prefer. For example, if you prefer English, browse to:

Driver\English\2k_XP

7 Click [Next].

The “Completing the Found New Hardware Wizard” dialog box ap- pears.

4-4 IC-205