Konica Minolta IC-205 manual Installing the printer driver

4

4

Installing the printer driver

Installing the printer driver

Installing the printer driver Chapter 4

This section describes the procedure for installing the printer driver. The printer driver can be installed in two ways: by using “Plug and Play” or by us- ing the “Add Printer Wizard”.

2

Note

If the machine is to be connected to a USB port, install the printer driver by using Plug and Play.

If the machine is to be connected to a parallel port, install the printer driv- er by using the Add Printer Wizard.

Connection	Compatible Operating	Printer Driver Installa-	Follow this procedure:
Method	Systems	tion
USB port	Windows XP, Windows	Install using Plug and	“Installing the TWAIN
connection	Server 2003, Windows	Play.	driver/printer driver us-
	2000, Windows Me, and		ing “Plug and Play”” on
	Windows 98 SE		page 4-4
Parallel port	Windows XP, Windows	Install using the Add	“Installing the printer
connection	Server 2003, Windows	Printer Wizard.	driver using the “Add
	2000, Windows NT 4.0,		Printer Wizard”” on
	Windows Me, Windows		page 4-9
	98 SE, and Windows 98

For network printing, use the “Add Printer Wizard” to install the printer driver. During installation, select “LPT1” as the printer port.

For details on specifying network connection settings, refer to the User’s Guide for the Network Interface Card.

2

Note

In order to use IPP (network) printing, the IPP printing settings must be specified when the printer driver is installed. For details on specifying the IPP printing settings, refer to the manual provided with the network inter- face card.

If the image controller is used on Windows 98, Windows 98 SE or Win- dows Me, the Network Setup utility cannot be used.

4-2 IC-205