Konica Minolta IC-205 manual Main messages, Error message Cause Action

Troubleshooting 8

8.2Main messages

The table below describes the main error messages that may appear during the PC print mode operations.

Error message	Cause	Action
PAPER SIZE ERROR	The paper size specified for a	Load paper of the correct size
	paper tray differs from the size	into the tray.
	of paper that is loaded.
NO SUITABLE PAPER	“Auto” is selected for paper	Tray 1:
	source with the printer driver	Change the paper size in the
	properties, but none of the	Utility mode, and load the cor-
	machine’s trays contain paper	rect paper into the tray.
	of the size specified for print-	Tray 2-Tray 5 (option):
	ing.	Use a paper feed unit loaded
		with paper of the correspond-
INCORRECT PAPER SIZE	The paper size specified by
		ing size.
	the printer driver is not loaded	Multi Bypass Tray:
	in the specified paper tray.	Change the paper that is load-
		ed.
		(NO SUITABLE PAPER)
		Press the [Start] key to begin
		printing with the paper source
		specified in Utility mode.
		(INCORRECT PAPER SIZE)
		Press the [Start] key to begin
		printing with the paper size
		loaded in the tray selected
		from the printer driver. (Tray 1
		and Tray 2-Tray 5)
PAPER EMPTY	There is no paper in the spec-	Load paper into the tray or
	ified tray or the specified tray	load tray in the machine.
	is not loaded in the machine.
MEDIA TYPE ERROR	The media type specified by	Load the correct paper into
	the printer driver is not loaded	the tray, and change the me-
	in the specified paper tray.	dia type in the Utility mode.
		Press the [Start] key to begin
		printing with the media type
		loaded in the tray selected
		from the printer driver. (Tray 1
		and Tray 2-Tray 5)
MEMORY FULL	The memory is full of stored	Press any key, and then turn
	data.	the machine off, then on
		again.

Troubleshooting Chapter 8

Note

If the data is not printed correctly, selecting “Send Page as Raster” from the printer driver may print correctly. Refer to “Rendering Mode” on page 5-27.

IC-205 8-3