Storage Drawer

(on some models)

The storage drawer can be removed. Before removing, make sure drawer is cool and empty.

To Remove:

1.Pull the storage drawer straight back to the drawer stop.

A

A. Drawer stop notch

2.Lift up the front of the drawer and pull the drawer out.

To Replace:

1.Lift up the front of the drawer and place the rear of the drawer inside the range so that the drawer stop notch is behind the drawer glide.

2.Lower the drawer so that the edge of the slide rail drops into the slot in the drawer glide.

3.Slowly push the drawer into the range.

A

A. Engage drawer glide.

NOTE: When properly installed, the rear slides on the bottom of the drawer will engage the base rails and the drawer will not tip when items are placed in the drawer.

Oven Door

For normal range use, it is not suggested to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. Then, follow these instructions. The oven door is heavy.

To Remove:

1.Open oven door all the way.

2.Pinch the hinge latch between two fingers and pull forward. Repeat on other side of oven door.

A

A. Hinge latch

3.Close the oven door as far as it will shut.

4.Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from the oven door frame.

To Replace:

1.Insert both hanger arms into the door.

2.Open the oven door.

You should hear a “click” as the door is set into place.

3.Move the hinge levers back to the locked position. Check that the door is free to open and close. If it is not, repeat the removal and installation procedures.

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Check that you have all of your tools.

3.Dispose of/recycle all packaging materials.

4.Check that the range is level. See the “Level Range” section.

5.Use a mild solution of liquid household cleaner and warm water to remove waxy residue caused by shipping material. Dry thoroughly with a soft cloth. For more information, read the “Range Care” section of the Use and Care Guide or User Instructions or User Instructions.

6.Read the “Range Use” section in the range Use and Care Guide or User Instructions.

7.Plug power cord into appropriate outlet. Turn power on.

8.Turn on surface burners and oven. See the Use and Care Guide or User Instructions for specific instruction on range operation.

If range does not operate, check the following:

■Household fuse is intact and tight; or circuit breaker has not tripped.

■Range is plugged into a grounded outlet.

■Electrical supply is connected.

IMPORTANT: If the range control displays an “F9” or “F9, E0” error code, the electrical outlet in the home may be miswired. Contact a qualified electrician to verify the electrical supply.

■See the “Troubleshooting” section in the Use and Care Guide or User Instructions.

When the range has been on for 5 minutes, check for heat. If range is cold, turn off the range and contact a qualified technician.

14

Page 13 Page 15
Page 14
Image 14
Whirlpool W10403811C Storage Drawer, Oven Door, Complete Installation, If range does not operate, check the following
Page 13 Page 15

W10403811C specifications

The Whirlpool W10403811C is a versatile and essential component for modern kitchens, serving as a range hood that enhances both functionality and aesthetic appeal. This powerful appliance is designed to improve ventilation, ensuring a clean and comfortable cooking environment by efficiently removing smoke, grease, and odors from the air.

One of the standout features of the W10403811C is its robust motor, which offers multiple fan speeds. This flexibility allows users to adjust the airflow based on their cooking needs, whether they’re simmering a delicate sauce or searing meats. The strong performance minimizes the accumulation of cooking residues on surfaces, making it easier to maintain a clean kitchen.

The design of the W10403811C is not only stylish but also practical. Its sleek stainless steel finish complements a variety of kitchen decors, providing a modern look that many homeowners desire. Additionally, the range hood includes integrated LED lighting, which adds brightness to the cooking space while also enhancing visibility when preparing meals. The energy-efficient LED bulbs last longer than traditional bulbs, reducing the need for frequent replacements.

In terms of installation, the W10403811C offers flexibility with both ducted and ductless options, catering to different kitchen layouts and preferences. For ductless installations, the appliance can be equipped with a charcoal filter that effectively recirculates the air, making it suitable for spaces without external ventilation.

Another impressive characteristic of this range hood is its quiet operation. Unlike some models that can be disruptive during cooking, the Whirlpool W10403811C is engineered to minimize noise, allowing for pleasant and uninterrupted cooking and dining experiences. This feature is especially valued in open-plan living areas where the kitchen, dining, and living spaces are interconnected.

Lastly, maintenance of the W10403811C is made easy with its dishwasher-safe filters. Regular cleaning of the filters is crucial for maintaining peak performance and extending the lifespan of the appliance. This user-friendly approach to maintenance empowers homeowners to keep their range hood operating at optimal efficiency without significant effort.

Overall, the Whirlpool W10403811C excels in delivering essential features, advanced technology, and thoughtful design, making it a valuable addition to any modern kitchen. Its combination of efficient ventilation, attractive aesthetics, and ease of use ensures that culinary enthusiasts can create delicious meals in a clean and comfortable environment.
Top Page Image Contents