Intel MFS5000SI, MFSYS35 manual Guideline Configure the MFSYS25 system as follows

Page 31

Manual background

Intel® Modular Server System MFSYS25, Intel® Modular Server System MFSYS35, Intel® Compute Module MFS5000SI

6.4SuSE Linux Enterprise Server 10 (32 & 64 bit) Remote Installation Method

Method for performing SuSE Linux Enterprise Server 10 Installation via SMB

Guideline: Configure the MFSYS25 system as follows:

1.Ensure P2.0.5 or later SW stack is loaded

2.Management Module, Ethernet Switch (1 port and with compute module ports in default vlan 1 setup) and client (desktop/laptop) in same network

3.Client requires DVD unit installed direct or via USB port

4.Disable client’s Firewall

5.Share the client’s DVD-unit with “all read/write permissions”

6.Log into CMM and via GUI create a Storage Pool and Virtual Drive and assign it to the compute module as LUN 0.

7.Via GUI select the compute module’s Remote KVM session and select CD- ROM Redirection and map to the DVD-drive-letter (E) on client

8.Select Video color resolution = High

9.Power on the compute module via the GUI

Revision 1.9

31

Image 31

Contents Intel Modular Server System MFSYS35 Enterprise Platforms and Services DivisionRevision March Intel Modular Server System MFSYS25Number Revision HistoryRevision DateDisclaimers Table of Contents List of Tables 1.Introduction 1.1.1Basic Installation Testing1.1Test Overview Revision 1.2Pass/Fail Test Criteria Table 2.1 Base System Configurations Tested Table 3.1 Operating Systems Tested 3.Supported Operating Systems & SoftwareRevision Table 3.2 Operating System Certifications 3.1Operating System Certificationsed&vendor=399&class=8#list 3.2Operating System Storage Component Support 4.I/O Expansion Cards & Peripherals Monitors Ethernet Expansion CardUSB Devices Revision External Storage Ethernet Switch ModulesStorage Controller Modules External Tape Drives5.Hard Disk Drives Table 5.2 Tested Hard Drives 6.Installation Guidelines 5.Enter a Name for the Virtual Disk 11.With the mouse, select the Chassis Front Tab Revision 20.Select OK when requested to power on Server Guideline Configure the MFSYS25 system as follows 13.To verify your FTP setup is correct User anonymous or hit F2 then type same command there OK 25.On the RedHat’s FTP Setup page, enter as Revision Guideline Configure the MFSYS25 system as follows install=smb //x.x.x.x/drive-letter