Intel MFSYS25, MFS5000SI, MFSYS35 manual Select OK when requested to power on Server

Page 24

20.Select OK when requested to power on Server 1.

Intel® Modular Server System MFSYS25, Intel® Modular Server System MFSYS35, Intel® Compute Module MFS5000SI

18.Return to the Modular Server screen and select the Chassis Front TAB. Do not close out the KVM screen.

19.Select Server 1 and then hit the Power On option under “Server 1” Actions.

20.Select OK when requested to power on Server 1.

21.Return to the KVM screen and observer the bootup screen.

22.Continue with Windows setup following the directions for the operating installation.

24	Revision 1.9

Image 24

Contents Enterprise Platforms and Services Division Revision MarchIntel Modular Server System MFSYS25 Intel Modular Server System MFSYS35Revision History RevisionDate NumberDisclaimers Table of Contents List of Tables 1.1.1Basic Installation Testing 1.Introduction1.1Test Overview Revision 1.2Pass/Fail Test Criteria Table 2.1 Base System Configurations Tested 3.Supported Operating Systems & Software Table 3.1 Operating Systems TestedRevision 3.1Operating System Certifications Table 3.2 Operating System Certificationsed&vendor=399&class=8#list 3.2Operating System Storage Component Support 4.I/O Expansion Cards & Peripherals Ethernet Expansion Card MonitorsUSB Devices Revision Ethernet Switch Modules Storage Controller ModulesExternal Tape Drives External Storage5.Hard Disk Drives Table 5.2 Tested Hard Drives 6.Installation Guidelines 5.Enter a Name for the Virtual Disk 11.With the mouse, select the Chassis Front Tab Revision 20.Select OK when requested to power on Server Guideline Configure the MFSYS25 system as follows 13.To verify your FTP setup is correct User anonymous or hit F2 then type same command there OK 25.On the RedHat’s FTP Setup page, enter as Revision Guideline Configure the MFSYS25 system as follows install=smb //x.x.x.x/drive-letter