Intel MFSYS35, MFSYS25, MFS5000SI manual 1.2Pass/Fail Test Criteria

Intel® Modular Server System MFSYS25, Intel® Modular Server System MFSYS35, Intel® Compute Module MFS5000SI

•

•

Intel will enable vendors to provide driver support for I/O Expansion Cards using these operating systems.

Intel will go through some of the steps to achieve certification to ensure its customers do not run across any problems, but the actual certification is the responsibility of the individual customer.

For operating systems, adapter cards, and peripherals not listed in this document, there is no support commitment. Intel will consider support requests on a case-by-case basis.

1.2Pass/Fail Test Criteria

For each operating system, I/O Expansion card, and peripheral configuration, a test passes if specific criteria are met. Specific configurations may have had particular characteristics that were addressed on a case-by-case basis. In general, a configuration passes testing if the following conditions are met:

ƒThe operating system installed without error.

-Manufacturer’s installation instructions or Intel’s best-known methods (BKMs) were used for the operating system installation.

-In some cases rKVM BKMs used involve workarounds and were required during the operating system installation.

-The server system behaved as expected during and after the operating system installation.

-Application software installed and executed normally.

ƒHardware compatibility tests ran to completion without error.

ƒTest software suites executed successfully

-Test and data files were created in the correct directories without error.

-Files copied from client to server and back compare to the original with zero errors reported.

-Clients remain connected to the server system.

-Industry standard test suites run to completion with zero errors reported.

All Intel® Compute Module MFS5000SI testing was performed using the Intel® Server Modular System MFSYS25 or the Intel® Server Modular System MFSYS35.

8 Revision 1.9