BIOS SETUP
Phoenix - AwardBIOS CMOS Setup Utility
2nd Super IO Device
|
|
|
|
|
| Onboard Serial Port 3 | 3E8h | ITEM HELP |
|
| Serial Port 3 Use IRQ | IRQ11 | Menu Level > |
|
| Onboard Serial Port 4 | 2E8h |
|
|
| Serial Port 4 Use IRQ | IRQ10 |
|
|
|
|
|
|
|
|
|
|
| |
|
| Phoenix - AwardBIOS CMOS Setup Utility |
| |
|
| USB Device Setting |
|
|
| USB 1.0 Controller | Enabled | ITEM HELP |
|
| USB 2.0 Controller | Enabled | Menu Level > |
|
| USB Keyboard Function | Enabled |
|
|
| USB Mouse Function | Enabled |
|
|
| USB Storage Function | Enabled |
|
|
| *** USB Mass Storage Device Boot Setting *** |
|
| |
|
|
|
|
|
|
|
|
|
|
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to transfer data to and from your hard disk drive.
IDE DMA Transfer Access
This field, by default, is Enabled
OnChip Secondary PCI IDE
This field, by default, is Enabled
IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster. Rather than have the BIOS issue a series of commands that transfer to or from the disk drive, PIO (Programmed Input/Output) allows the BIOS to communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which primarily differ in timing. When Auto is selected, the BIOS will select the best available mode.
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to 33Mb/sec with the Ultra DMA/33 feature. The options are Auto and Disabled.
40 | MB898 User’s Manual |