BIOS SETUP
PNP/PCI Configurations
This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Init Display First | PCI Slot |
Reset Configuration Data | Disabled |
Resources Controlled By | Auto (ESCD) |
IRQ Resources | Press Enter |
PCI/VGA Palette Snoop | Disabled |
INT Pin 1 Assignment | Auto |
INT Pin 2 Assignment | Auto |
INT Pin 3 Assignment | Auto |
INT Pin 4 Assignment | Auto |
INT Pin 5 Assignment | Auto |
INT Pin 6 Assignment | Auto |
INT Pin 7 Assignment | Auto |
INT Pin 8 Assignment | Auto |
**PCI Express relative items** | 128 |
Maximum Payload Size | |
|
|
ITEM HELP
Menu Level
Select Yes if you are using a Plug and Play capable operating system Select No if you need the BIOS to configure
Init Display First
The default setting is PCI Card.
Reset Configuration Data
The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices with the use of a PnP operating system such as Windows 95.
PCI/VGA Palette Snoop
Some
Maximum Payload Size
The default setting of the PCI Express Maximum Payload Size is 128.
MB898 User’s Manual | 45 |