Intel D845PEMY Revision Revision History Date, FCC Declaration of Conformity, Disclaimer

Page 2

Revision History

Revision

Revision History

Date

 

 

 

-001

First release of the Intel® Desktop Board D845PEMY Product Guide

July 2004

If an FCC declaration of conformity marking is present on the board, the following statement applies:

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For questions related to the EMC performance of this product, contact:

Intel Corporation

5200 N.E. Elam Young Parkway Hillsboro, OR 97124 1-800-628-8686

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the user’s authority to operate the equipment.

Canadian Department of Communications Compliance Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numerique német pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le broullage radioélectrique édicté par le ministére des Communications du Canada.

Disclaimer

Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.

Desktop Board D845PEMY may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from Intel Corporation by going to the World Wide Web site at: http://www.intel.com/ or by calling 1-800-548-4725.

Intel, Celeron and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

*Other names and brands may be claimed as the property of others. Copyright © 2004, Intel Corporation. All rights reserved.

Image 2
Contents Intel Desktop Board D845PEMY Product Guide FCC Declaration of Conformity Revision HistoryRevision Revision History Date Canadian Department of Communications Compliance StatementInformation Layout PrefaceIntended Audience ConventionsBox Contents TerminologyContents Bios Contents TablesViii Desktop Board Features Feature SummarySupported Operating Systems Desktop Board Features Desktop Board ComponentsBios Item DescriptionProcessor Processor SupportMain Memory Memory SupportIntel D845PE Chipset Audio SubsystemEnhanced IDE Interface RJ-45 LAN Connector LEDsLAN Subsystem Expansion SlotsSecurity Passwords PCI Auto ConfigurationIDE Auto Configuration Chassis Intrusion Power Management FeaturesPower Connectors Fan HeadersReal-Time Clock BatterySpeaker Intel Desktop Board D845PEMY Product Guide Installing and Replacing Desktop Board Components Before You BeginEnsure Electromagnetic Compatibility EMC Compliance Installation PrecautionsInstallation Instructions Installing and Replacing Desktop Board Components Prevent Power Supply OverloadPlace Battery Marking Chassis and Component CertificationsInstalling the I/O Shield Use Only for Intended ApplicationsInstalling and Removing the Desktop Board Desktop Board Mounting Screw HolesInstalling the Processor Fan Heatsink Installing and Removing a ProcessorInstalling a Processor Connecting the Processor Fan Heatsink Cable Removing a ProcessorRemoving the AGP Card Installing and Removing an AGP CardInstalling an AGP Card Installing and Removing Dimms Installing DIMMsConnecting the IDE Cable Removing DIMMsConnecting the IDE Cable Connecting Internal Headers Internal HeadersPin Signal Name Installing a Front Panel Audio SolutionFront Panel Audio Header Signal Names J8A1 Front Panel Header Connecting the Front Panel HeaderInstalling a USB Solution USB HeaderConnecting Hardware Control and Power Cables Location of Hardware Control Headers and Power ConnectorsConnecting the Chassis Intrusion Cable Connecting FansConnecting Power Cables Locating the Add-in Card and Peripheral Interface Connectors Jumper Setting Mode Description Setting the Bios Configuration Jumper BlockJumper Settings for the Bios Setup Program Modes Clearing Passwords Back Panel Connectors Back Panel ConnectorsReplacing the Battery PrécautionPrecaución Awas Removing the Battery from the Desktop Board Updating the Bios with the Intel Iflash Bios Update Utility Using the Bios Setup ProgramUpdating the Bios Obtaining the Bios Update FileUpdating the Bios Recovering the BiosBios Intel Desktop Board D845PEMY Product Guide DMA Channels Desktop Board ResourcesMemory Map System Memory MapInterrupts InterruptsBeep Codes Error Messages and IndicatorsBios Beep Codes Number of Beeps DescriptionError Message Explanation Bios Error MessagesBios Error Messages Error Messages and Indicators Nvram / Cmos / PasswordIntel Desktop Board D845PEMY Product Guide Regulatory Compliance Safety RegulationsSafety Regulations European Union Declaration of Conformity StatementRecycling Considerations Product Ecology StatementsDisposal Considerations Regulatory Compliance EMC RegulationsEMC Regulations Description Mark Product Certification Markings Board LevelProduct Certification Markings