Intel D845EPI manual Revision History

Page 2

Revision History

Revision Revision History

-001

First release of the Intel® Desktop Board D845EPI Product Guide.

Date

July 2003

If an FCC declaration of conformity marking is present on the board, the following statement applies:

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For questions related to the EMC performance of this product, contact:

Intel Corporation

5200 N.E. Elam Young Parkway Hillsboro, OR 97124 1-800-628-8686

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the user’s authority to operate the equipment.

Canadian Department of Communications Compliance Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numerique német pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le broullage radioélectrique édicté par le ministére des Communications du Canada.

Disclaimer

Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.

Desktop Board D845EPI may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from Intel Corporation by going to the World Wide Web site at: http://www.intel.com/ or by calling 1-800-548-4725.

Intel, Celeron, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

*Other names and brands may be claimed as the property of others. Copyright © 2003, Intel Corporation. All rights reserved.

Image 2
Contents Intel Desktop Board D845EPI Product Guide Revision History Preface Following conventions are used in this manualTerminology Contents Desktop Board Resources Contents Regulatory ComplianceTables Feature Summary Desktop Board FeaturesDescribes the major features of Intel Desktop Board D845EPI Power ManagementSupported Operating Systems Desktop Board Features Desktop Board ComponentsRelated Links Item DescriptionType ProcessorProcessors Supported by the Desktop Board Designation GHzMemory Speed Main MemoryMemory Support System Bus MHzIntel 845E Chipset Audio SubsystemLAN Subsystem Optional RJ-45 LAN Connector LEDsRJ-45 LAN Connector LEDs Accelerated Graphics Port AGPEnhanced IDE Interface PCI Auto ConfigurationHi-Speed USB 2.0 Support Expansion SlotsSecurity Passwords Power Management FeaturesIDE Auto Configuration Chassis Intrusion Power ConnectorsFan Headers Suspend to RAM Instantly Available PC TechnologyReal-Time Clock BatterySpeaker Installing and Replacing Desktop Board Components Before You BeginEnsure Electromagnetic Compatibility EMC Compliance Installation PrecautionsInstallation Instructions Installing and Replacing Desktop Board Components Prevent Power Supply OverloadPlace Battery Marking Chassis and Component CertificationsInstalling the I/O Shield Use Only for Intended ApplicationsInstalling and Removing the Desktop Board Desktop Board Mounting Screw HolesInstalling the Processor Fan Heatsink Installing and Removing a ProcessorInstalling a Processor Connecting the Processor Fan Heatsink Cable Removing a ProcessorInstalling and Removing Memory Installing DIMMsRemoving DIMMs Removing the AGP Card Installing and Removing an AGP CardInstalling an AGP Card Connecting the IDE Cable Connecting the IDE Cable Connecting Internal Headers Internal HeadersPin Signal Name Installing a Front Panel Audio SolutionFront Panel Audio Header Signal Names J8A1 Shows the pin assignments for the front panel audio headerFront Panel Header J9G1 Connecting the Front Panel HeaderInstalling a USB 2.0 Solution USB 2.0 Header J9F2Connecting Hardware Control and Power Cables Location of Hardware Control and Power ConnectorsConnecting Hardware Control Cables Connecting Power CablesConnecting Add-In Card and Peripheral Interface Connectors Shows the add-in card and peripheral interface connectorsJumper Setting Mode Setting the Bios Configuration Jumper BlockJumper Settings for the Bios Setup Program Modes J9H2 Clearing Passwords Back Panel Connectors Shows the back panel connectorsReplacing the Battery $87,21$9957,0172 $$6 Removing the Battery from the Desktop Board Intel Desktop Board D845EPI Product Guide Obtaining the Bios Update File Updating the BiosUpdating the Bios with the Intel Iflash Bios Update Utility Updating the Bios Recovering the BiosUpdating the Bios Power cordTurn on the computer and continue with the Bios update see Intel Desktop Board D845EPI Product Guide Bios Setup Program Menu Bar Using the Bios Setup ProgramShows the Bios Setup program menu bar Maintenance Menu Maintenance MenuBios Setup Program Function Keys Shows the function keys available for menu screensMain Menu Using the Bios Setup ProgramEnglish default Main MenuFeature Options MaintenanceSecurity Power Boot Exit Advanced MenuPCI Configuration PCI Configuration SubmenuPCI Configuration Submenu Options Auto default DescriptionBoot Configuration Boot Configuration SubmenuBoot Configuration Submenu Options No defaultAuto default 3F8 default Peripheral Configuration SubmenuPeripheral Configuration Submenu IRQ 4 defaultIRQ 7 default Bi-directional defaultDefault Enabled default DescriptionIDE Configuration IDE Configuration SubmenuIDE Configuration Submenu Both defaultPrimary/Secondary IDE Master/Slave Submenus Sectors default DescriptionPrimary/Secondary IDE Master/Slave Submenus Options Auto default Disabled default Diskette Configuration Diskette Configuration SubmenuDiskette Configuration Submenu 44 MB 3½ defaultEvent Log Configuration Event Log Configuration SubmenuEvent Log Configuration Submenu Video Configuration Submenu Video Configuration SubmenuSubmenu shown in is used to configure video features Video ConfigurationUSB Configuration Submenu USB Configuration SubmenuMenu shown in is used to configure USB features USB ConfigurationChipset Configuration Chipset Configuration SubmenuChipset Configuration Submenu Options Enabled defaultOptions Auto default Full default If no password entered previously FeatureYes default Security MenuPower Menu Power MenuMenu shown in is used to set power management features Last State defaultAcpi Submenu Submenu represented in is for setting the Acpi featuresAdvanced Configuration and Power Interface Acpi SubmenuMain Advanced Security Power Boot MenuBoot Menu Boot Device Priority Submenu Boot Device Priority SubmenuSubmenu represented in is for setting boot devices priority Options DescriptionHard Disk Drives Submenu Submenu shown in is for setting hard disk drivesHard Disk Drives Submenu Options DescriptionRemovable Devices Submenu Submenu in shown is for setting removable devicesRemovable Devices Submenu Atapi CD-ROM Drives Submenu Submenu shown in is for setting Atapi CD-ROM drivesAtapi CD-ROM Drives Exit Menu Feature DescriptionExit Menu DMA Channels Desktop Board ResourcesMemory Map System Memory MapInterrupts InterruptsBeep Codes Error Messages and IndicatorsBios Beep Codes Number of Beeps DescriptionError Message Bios Error MessagesBios Error Messages ExplanationError Messages and Indicators Intel Desktop Board D845EPI Product Guide Regulatory Compliance Safety RegulationsSafety Regulations European Union Declaration of Conformity StatementRecycling Considerations Product Ecology StatementsDisposal Considerations Regulatory Compliance EMC RegulationsEMC Regulations Description Mark Product Certification Markings Board LevelProduct Certification Markings