Intel D945GCLF2 System Memory, Supported Memory Configurations, For information about… Refer to

Product Description

1.5System Memory

The board has one 240-pin DIMM socket and supports the following memory features:

•1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts

•Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported.

•2 GB maximum total system memory

•Minimum total system memory: 128 MB

•Non-ECC DIMMs

•Serial Presence Detect

•DDR2 533 MHz or DDR2 400 MHz SDRAM DIMMs (DDR2 800 MHz and DDR2 667 MHz validated to run at 533 MHz only)

NOTE

To be fully compliant with all applicable DDR2 SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency.

Table 3 lists the supported DIMM configurations.

Table 3. Supported Memory Configurations

DIMM		SDRAM	SDRAM Organization		Number of SDRAM
Capacity	Configuration	Density	Front-side/Back-side		Devices
128 MB	SS	256 Mbit	16	M x 16/empty	4
256 MB	SS	256 Mbit	32	M x 8/empty	8
256 MB	SS	512 Mbit	32	M x 16/empty	4
512 MB	DS	256 Mbit	32	M x 8/32 M x 8	16
512 MB	SS	512 Mbit	64	M x 8/empty	8
512 MB	SS	1 Gbit	64	M x 16/empty	4
1024 MB	DS	512 Mbit	64	M x 8/64 M x 8	16
1024 MB	SS	1 Gbit	128 M x 8/empty		8
2048 MB	DS	1 Gbit	128 M x 8/128 M x 8		16

Note: In the second column, “DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers to single-sided memory modules (containing one row of SDRAM).

For information about…	Refer to:
Tested Memory	http://support.intel.com/support/motherboards/desktop/sb/
	CS-025414.htm

15