Intel D945GCLF2 specifications Revision Revision History Date

Page 2

Revision History

Revision

Revision History

Date

 

 

 

-001

First release of the Intel® Desktop Board D945GCLF2 Technical Product

September 2008

 

Specification.

 

 

 

 

This product specification applies to only the standard Intel® Desktop Board D945GCLF2 with BIOS identifier LF94510J.86A.

Changes to this specification will be published in the Intel Desktop Board D945GCLF2 Specification Update before being incorporated into a revision of this document.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.

Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.

Intel may make changes to specifications and product descriptions at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

Intel® Desktop Boards may contain design defects or errors known as errata, which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications before placing your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from:

Intel Corporation

P.O. Box 5937

Denver, CO 80217-9808

or call in North America 1-800-548-4725, Europe 44-0-1793-431-155, France 44-0-1793-421-777, Germany 44-0-1793-421-333, other Countries 708-296-9333.

Intel, the Intel logo, and Intel Atom are trademarks of Intel Corporation in the United States and other countries.

*Other names and brands may be claimed as the property of others. Copyright © 2008, Intel Corporation. All rights reserved.

Image 2
Contents D945GCLF2 Revision History Revision Revision History DateTypographical Conventions Intended AudienceWhat This Document Contains Chapter DescriptionOther Common Notation Contents Error Messages and Beep Codes Contents TablesViii Overview Feature SummaryFeature Summary Instantly Available Board Layout Product DescriptionBoard Components Shown in Figure Item/callout From Figure DescriptionBlock Diagram Block DiagramProcessor Legacy ConsiderationsOnline Support To find information about… Visit this World Wide Web siteFor information about… Refer to Supported Memory ConfigurationsSystem Memory Intel GMA950 Graphics Controller Intel 945GC ChipsetIntel 945GC Graphics Subsystem Configuration Modes Dynamic Video Memory Technology Dvmt2 USB Page Real-Time Clock Subsystem Serial Port Video OutputLegacy I/O Controller Parallel PortKeyboard and Mouse Interface Audio Subsystem Audio Jack Retasking SupportItem Description Audio Connectors and HeadersAudio Subsystem Software LAN Subsystem LAN Subsystem Software11.2 RJ-45 LAN Connector with Integrated LEDs LAN Connector LED StatesHardware Management Subsystem Hardware MonitoringThermal Monitoring Thermal Sensors and Fan HeadersAcpi Power ManagementEffects of Pressing the Power Switch System States and Power States Power States and Targeted System PowerWake-up Devices and Events Wake-up Devices and EventsPower Connector Hardware SupportFan Headers LAN Wake CapabilitiesInstantly Available PC Technology Wake from USB 13.2.7 PME# Signal Wake-up Support13.2.8 +5 V Standby Power Indicator LED Wake from PS/2 DevicesEnergy Star Memory Map Addressable MemoryDetailed System Memory Address Map Address Range Decimal Hex Size Description System Memory MapTechnical Reference Connectors and Headers Back Panel Connectors Back Panel ConnectorsComponent-side Connectors and Headers Component-side Connectors and HeadersComponent-side Connectors and Headers Shown in Figure Signal Tables for the Connectors and Headers Main Power Connector Add-in Card ConnectorsPower Supply Connectors ATX12V Power Connector Front Panel Header Front Panel HeaderStates for a One-Color Power LED Reset Switch HeaderPower/Sleep LED Header States for a Two-Color Power LEDConnection Diagram for Front Panel USB Headers Front Panel USB HeadersFunction/Mode Jumper Setting Configuration Jumper BlockMechanical Considerations Form FactorElectrical Considerations Power Supply ConsiderationsRecommended Power Supply Current Values Fan Header Current CapabilityThermal Considerations Add-in Board ConsiderationsComponent Maximum Case Temperature Thermal Considerations for ComponentsReliability Intel Desktop Board D945GCLF2 Environmental SpecificationsParameter Specification EnvironmentalPage Overview of Bios Features Introduction1 PCI* Autoconfiguration Bios Flash Memory OrganizationResource Configuration Bios Setup Program Menu BarSystem Management Bios Smbios Overview of Bios FeaturesLegacy USB Support Custom Splash Screen Bios UpdatesLanguage Support Media Type Can be used for Bios recovery? Bios RecoveryAcceptable Drives/Media Types for Bios Recovery Network Boot Boot OptionsCD-ROM Boot Booting Without Attached DevicesBios Boot Optimizations Adjusting Boot SpeedPeripheral Selection and Configuration Bios Security Features Supervisor and User Password FunctionsPage Type Pattern Bios Front-panel Power LED CodesFront-panel Power LED Blink Codes Bios Error Messages Bios Beep CodesBios Error Messages Beep CodesPort 80h Post Code Ranges Error Messages and Beep CodesPort 80h Post Codes Range Category/SubsystemPort 80h Post Codes Fixed Media Post Code Description of Post OperationMouse PS/2 or USB Removable MediaDXE Drivers Typical Port 80h Post Sequence Post Code DescriptionPage Regulatory Compliance Safety StandardsSafety Standards Standard TitleEuropean Union Declaration of Conformity Statement Disposal Considerations Regulatory Compliance and Battery Disposal InformationProduct Ecology Statements Recycling ConsiderationsEspañol Lead Free Intel Desktop Board RussianLead-Free Board Markings Description MarkRegulation Title EMC RegulationsEMC Regulations Product Certification Markings Board Level Product Certification MarkingsBattery Disposal Information PrecautionPrecaución Awas

D945GCLF2 specifications

The Intel D945GCLF2 is a compact and efficient motherboard designed for the Intel Atom processor family, particularly suited for low-power, cost-sensitive systems. This mini-ITX form factor board was released as a part of Intel's D945 series, targeting small form factor PCs, embedded systems, and home theater PC (HTPC) builds.

One of the standout features of the D945GCLF2 is its support for the Intel Atom N270 processor, a dual-core CPU that operates at a low thermal design power (TDP) of just 4 watts. This makes the board ideal for users looking to build energy-efficient systems without compromising on performance. The motherboard supports up to 2GB of DDR2 RAM, utilizing a single-channel memory architecture, which, while modest by today’s standards, suffices for basic computing tasks such as browsing, document editing, and media playback.

In terms of connectivity, the D945GCLF2 integrates a variety of I/O ports that enhance usability. It features four USB 2.0 ports, one PCI slot, and an IDE connector, catering to older peripherals while also allowing for the installation of additional components like graphics cards and network adapters. The onboard Intel Graphics Media Accelerator 950 provides adequate graphics performance for everyday activities and even supports HD video playback, making it a solid choice for multimedia applications.

Incorporating Intel's Advanced Configuration and Power Interface (ACPI) technology, the D945GCLF2 allows for efficient power management, giving users the flexibility to optimize their system's energy consumption. The board also includes essential connectivity options such as Ethernet through a 10/100 LAN port, facilitating wired networking capabilities.

Furthermore, the D945GCLF2 is equipped with multiple storage options; it provides support for Serial ATA (SATA) devices, allowing for faster data transfer rates compared to traditional PATA drives. The BIOS is user-friendly and offers a range of settings for users looking to tweak their system's performance.

Overall, the Intel D945GCLF2 motherboard is a robust solution for anyone looking to build a low-cost, low-power computing system. Its combination of small form factor, energy efficiency, and decent performance makes it suitable for a variety of applications, from basic user tasks to serving as the core of a compact home theater setup. Despite its age, the D945GCLF2 remains relevant for specific, budget-friendly builds, showcasing Intel's legacy in innovative motherboard design.