Intel E7501 user manual Video, Halt On

Page 33

BIOS SETUP

Video

This field selects the type of video display card installed in your system. You can choose the following video display cards:

EGA/VGA

For EGA, VGA, SEGA, SVGA

 

or PGA monitor adapters. (default)

CGA 40

Power up in 40 column mode.

CGA 80

Power up in 80 column mode.

MONO

For Hercules or MDA adapters.

Halt On

This field determines whether or not the system will halt if an error is detected during power up.

No errors

The system boot will not be halted for any error

 

that may be detected.

All errors

Whenever the BIOS detects a non-fatal error,

 

the system will stop and you will be prompted.

All, But Keyboard

The system boot will not be halted for a

 

keyboard error; it will stop for all other errors

All, But Diskette

The system boot will not be halted for a disk

 

error; it will stop for all other errors.

All, But Disk/Key

The system boot will not be halted for a key-

 

board or disk error; it will stop for all others.

AFW-3000 User’s Manual

29

Image 33
Contents Version USER’S ManualAcknowledgments Table of Contents This page is intentionally left blank Product Description IntroductionChecklist Chipset SpecificationsKB/MS LPT Vgaconn Quick GuideBoard Dimensions This page is intentionally left blank Installations Installing the CPU ATX Power Installation Installing the MemorySupported DDR Dimm Configurations To remove the DDR module, press the clips with both hands Setting the Jumpers Jumper Locations on AFW-3000 SW1 5-8 For J2 PCI/PCI-X Slot SW1 1-4 For 82546EB Gigabit LAN-1 CN1, CN2Configuring the CPU Frequency JP6 Clear Cmos ContentsSW2 1-4 For 82546EB Gigabit LAN-2 CN11, CN12 JP8 Power Reset Switch JP9 AT / ATX Power Supply SelectJP1, JP2, JP3, JP5 Reserved Jumpers Connectors on AFW-3000 Connector Locations on AFW-3000 CN1, CN2, CN3, CN4 Gigabit LAN RJ45 Connectors CN6 CF Card Connector Type CN7 ATX Power Supply ConnectorCN5, J9 Serial Ports J1 VGA CRT Connector CN8 ATX 12V/+12V Power ConnectorJ6 External Keyboard Connector UJ1, UJ2 USB PortsJ7 Extra Lanled Define Pin RJ45 LED SignalIDE1 Eide Connector J8 Parallel Port ConnectorInstallations FAN1, FAN2, FAN3, FAN4 CPU Fan Power Connectors FDD1 Floppy Drive ConnectorBios Setup Bios Setup Bios IntroductionPhoenix Award WorkstationBIOS Cmos Setup Utility Date Standard Cmos SetupTime IDE Primary HDDs / IDE Secondary HDDsDrive a / Drive B Halt On VideoVirus Warning Advanced Bios FeaturesCPU Internal Cache / External Cache Hyper-Threading TechnologyFirst/Second/Third Boot Device Quick Power On Self TestBoot Other Device Boot Up Floppy SeekVideo Bios Shadow Typematic Delay MsecSecurity Option MPS Version Control for OSAdvanced Chipset Features Integrated Peripherals OnChip IDE DeviceOnboard Device Super IO Device Power Management Setup Power ManagementAcpi Function HDD Power Down Suspend ModeVideo Off Method Video Off In SuspendResume by Alarm Power On by RingReload Global Timer Events Wake Up by PCI CardPNP OS Installed PNP/PCI ConfigurationsResources Controlled by IRQ / DMA ResourcesTemperatures/Fan Speeds/Voltages CPU Warning TemperaturePC Health Status Fan Failure WarningCPU Clock Ratio Frequency/Voltage ControlAuto Detect DIMM/PCI Clk Spread SpectrumLoad Setup Defaults Load Fail-Safe DefaultsSet Supervisor/User Password Save & Exit SetupThis page is intentionally left blank Drivers Installation Intel E7501 Chipset Drivers Installation VGA Driver Installation Ethernet Drivers