Installing and Replacing Desktop Board Components
Connecting Supply Power Cables
CAUTION
Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2 pin) power connector to the Desktop Board may result in damage to the board or the system may not function properly.
The 2 x 12 pin main power connector on the Desktop Board is backwards compatible with ATX12V power supplies with 2 x 10 connectors. Figure 26 shows the location of the Desktop Board power connectors.
Figure 26. Connecting Power Supply Cables
1.Observe the precautions in "Before You Begin" on page 31.
2.Connect the main power supply cable to the 2 x 12 pin connector.
3.Connect the 12 V processor core voltage power supply cable to the 2 x 2 pin connector.
57