Intel DQ35MP manual Configuring for RAID Intel Matrix Storage Technology, Contents

Contents

4	Configuring for RAID (Intel® Matrix Storage Technology)
	Configuring the BIOS for Intel Matrix Storage Technology		71
	Creating Your RAID Set		71
	Loading the Intel Matrix Storage Technology RAID Drivers and Software		72
	Setting Up a “RAID Ready” System		72
5	Configuring for Intel® Rapid Recover Technology
	Enabling Intel Rapid Recover Technology		73
	Creating a Recovery Volume		74
		Creating a Recovery Volume Using the RAID Option ROM	74
		Creating a Recovery Volume Using the Intel Matrix Storage Console	74
	Disk Synchronization Mode		75
	Mounting the Recovery Disk		75
A	Error Messages and Indicators
	BIOS Beep Codes		77
	BIOS Error Messages		77
B	Regulatory Compliance
	Safety Standards		79
		Place Battery Marking	79
	European Union Declaration of Conformity Statement		80
	Product Ecology Statements		81
		Recycling Considerations	81
		Lead-Free Desktop Board	83
	EMC Regulations		85
		Ensure Electromagnetic Compatibility (EMC) Compliance	86
	Product Certifications		87
		Board-Level Certification Markings	87
		Chassis and Component Certifications	88
Figures
	1.	Desktop Board DQ35MP Components	12
	2.	LAN Connector LEDs	19
	3.	Intel AMT Status Indicator	20
	4.	Standby Power Indicator	28
	5.	Installing the I/O Shield	33
	6.	Desktop Board DQ35MP Mounting Screw Hole Locations	34
	7.	Lift the Socket Lever	35
	8.	Lift the Load Plate	36
	9.	Remove the Protective Socket Cover	36
	10.	Remove the Processor from the Protective Processor Cover	37
	11.	Install the Processor	37
	12.	Close the Load Plate	38
	13.	Connecting the Processor Fan Heat Sink Cable to the Processor Fan Header	39
	14.	Dual Channel Memory Configuration with Two DIMMs	41
	15.	Dual Channel Memory Configuration with Four DIMMs	41
	16.	Dual Channel Memory Configuration with Three DIMMs	42
	17. Use DDR2 DIMMs		43
	18.	Installing a DIMM	44

vii