2.5.5 Serial ATA Connectors
Each SATA connector serves as one single channel to connect one SATA device by a thin SATA cable.
The disk array for RAID configuration is also provided through these SATA connectors:
•SATA1~SATA4: Available for RAID 0, RAID 1, RAID 5, or RAID 10 configuration by the utility “Intel Matrix Storage Manager”.
•SATA5~SATA6: Available for RAID 0 or RAID 1 configuration by the utility “Sil3132 SATA RAID Driver”.
For more information on how to configure the function mode for SATA, please refer to the item
Hardware Setup
SATA signal cable (optional) | SATA power cable (optional) |
AW8D |