•FP-AUDIO1: This header provides the connection to audio connector at front panel.
| Pin | Pin Assignment | Pin | Pin Assignment |
| | | | |
| 1 | MIC2 L | 2 | AGND |
| 3 | MIC2 R | 4 | AVCC |
| 5 | FRO-R | 6 | MIC2_JD |
| 7 | F_IO_SEN | 8 | |
| | | | |
| 9 | FRO-L | 10 | LINE2_JD |
| | | | |
S/PDIF Connection:
In the motherboard package you can find one audio daughter-card and one optical-fiber cable.
•S/PDIF Input Connection:
1.Remove the rubber protection-cap. Attach one end of the optical cable with the 3.5mm Optical-to-Stereo adapter, and have it plugged into the [Line-In] jack on this daughter-card. (This jack is served for either optical or line input.)
2.Connect the other end of the optical cable to the [Digital-Out] (SPDIF-Out) jack on your digital multimedia device.
•S/PDIF Output Connection:
1.Remove the rubber protection-cap. Plug one end of the optical cable into the [SPDIF-Out] jack on this daughter-card.
2.Connect the other end of the optical cable to the [Digital-In] (SPDIF-In) jack on your digital multimedia device.
