Maintenance
The heads and tape path should be cleaned | Pinch Roller | ||
and demagnetized periodically. |
|
|
|
|
|
| |
| Capstan |
| |
|
|
| |
|
|
|
|
IMPORTANT (for U.K. Customers)
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suit-
Cleaning tape path
OApply head cleaning fluid* to a cotton bud or soft cloth, and lightly rub the heads, capstan and all metal parts in the tape path.
OAlso clean the pinch roller using rubber
cleaning fluid*.
*Both are available in TEAC Tape Cleaning Kits
Erase Head
Record/Play Head
Demagnetizing heads
Be sure that the power is off, then demag- netize the heads using a TEAC
able for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or con- sult your dealer.
If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.
If this product is not provided with a mains plug, or one has to be fitted, then follow the instructions given below:
IMPORTANT. DO NOT make any con- nection to the larger terminal which is marked with the letter E or by the safety earth symbol ç or coloured GREEN or
Specifications
CD player section
(Audio)
Number of channels: 2
Frequency response: 10 - 20,000 Hz ± 0.5 dB
Dynamic range: 90 dB
Total harmonic distortion: 0.02% (1 kHz)
Wow and flutter:
Unmeasurable (quartz accuracy) Channel separation: 75 dB Output: 2 Vrms
Digital filter:
Analog filter: 3rd order
(Signal format)
Sampling frequency: 44.1 kHz
D/A converter:
Channel bit rate: 4.3218 Mb/sec.
Channel modulation code: EFM
Error correction: CIRC
(Pickup)
Type: Objective lens drive, optical
Objective Lens:
Laser Type:
GaAIAs type semiconductor laser Wave length: 780 nm
Cassette section
Track system:
Heads: Record/playback x 1 (rotary reverse), erase x 1
Type of tape: Cassette tape
Tape speed: 4.76 cm/sec.
Motor: DC servo motor x 1
Wow and flutter: 0.08% (W. RMS)
Frequency response (overall):
50 – 15,000 Hz ± 3 dB, metal
50 – 15,000 Hz ± 3 dB, chrome
50 – 14,000 Hz ± 3 dB, normal
59dB(DOLBYNRoff,3%THD level, weighted), 69 dB (DOLBY NR on, over 5 kHz)
Fast winding time: Approx. 120 sec. (with C- 60)
Input: Line; 87 mV (input impedance of 50 kohms or more)
Output: Line; 0.46 V (load impedance of 50 kohms or more)
Headphones; 1 mV/8 ohms
General
Power requirements: 120/230 V AC,
Power consumption: 14 W
Dimensions (W x H x D):
483 x 133 x 270 mm (19" x
Weight: 6.4 kg (14.1 lbs.)
Standard Accessories
Wireless remote control
OImprovements may result in specifi- cation or feature changes without notice.
OPhotos and illustrations may differ slightly from production models.
483mm |
466mm |
435mm |
_ 16 _ |
The wires in the mains lead on this prod- uct are coloured in accordance with the following code:
BLUE: NEUTRAL
BROWN: LIVE
As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured
BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
When replacing the fuse only a correct- ly rated approved type should be used and be sure to
IF IN DOUBT — CONSULT A COMPE- TENT ELECTRICIAN.
15mm | 270mm | 6mm |
|
|
|
|
|
|
|
|
|
| 132.7mm |
|
|
|
|
|
| |
| 57.2mm |
|
| 138.5mm | |
| |||||
| |||||
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|