Global Machinery Company PCH37 instruction manual Symbols on the machine, Specifications

Symbols on the machine

Fuel inlet.

(Position: under the fuel tank cap.)

Chain oil inlet.

(Position: next to the oil tank cap.)

On/Off.

(Position: on the on/off switch.)

Setting the on/off switch to Off, stops the engine immediately.

Run position.

Start position (when engine is warm.)

Start position (when engine is cold.)

Choke control

(Position: next to knob on the top cover)

High run adjustment screw. Low run adjustment screw.

Idle adjustment screw.

(Position: left side of machine close to pull start handle.)

Chain brake released (hollow arrow) and activated (solid arrow.) (Position: right side of machine, on chain drive cover.)

Specifications

Engine displacement:	37cc
Maximum engine power:	1200W
Engine type:	Air cooled, single
	cylinder, two-stroke cycle
Recommended maximum
engine speed at idling:	2600min-1
Maximum engine speed
with cutting attachment:	9000min-1
Fuel type:	Unleaded petrol/
	2-stroke oil (50/1)
Fuel tank capacity:	310ml
Oil tank capacity:	210ml
Spark plug:	LD L8RTF NGK BM6A
	Champion CJ8
Oil feeding system:	Automatic pump
Sprocket wheel:	6–teeth x 9.53mm
	(3/8”) pitch
Guide bar type:	Sprocket nose
Guide bar cut length:	405mm (16”)
Chain type:	Oregon 91VG
Chain pitch:	9.53mm (3/8”)
Weight (including
guide bar and chain):	5.2kg
Sound pressure level:	93.4 dB(A)

4