Filling up with fuel and oil

NOTE. Ensure the engine is switched off when making any adjustments to the chain and bar.

CAUTION. A new chain will stretch after just a few minutes of use. Check and, if necessary, re-adjust the chain tension. A loose chain causes rapid wear to both the chain and the guide bar and could derail causing a major safety hazard.

WARNINGS. Petrol is very flammable. Avoid smoking or causing any sparks or flames near fuel. Make sure that you stop the motor and allow it to cool before refuelling the machine. Select outdoor bare ground for fuelling and move at least 3m away from the fuelling point before starting the motor.

•Only use oil that is expressly labelled for use with air- cooled 2-stroke engines. DO NOT use BIA or TCW (2-stroke water-cooling type) mixed oil.

The recommended mixing ratio is PETROL 50: OIL 1

•Use unleaded petrol with a minimum Octane number of

89. If you use petrol with an Octane number lower than 89, there is a danger that the engine might overheat and the piston seize.

•Poor quality petrol or oil may damage sealing rings, fuel lines or the fuel tank. Do not use wasted or regenerated oil, it can damage the oil pump.

CAUTION. To maximise the lifetime of the engine, avoid the following:

•Do not use raw petrol, it will severely damage the engine very quickly.

•Do not use oil meant for 4-stroke engines, it will cause spark plug fouling, exhaust blocking and piston ring sticking.

•Do not use fuel mixtures that have been left standing for one month or more, they can cause clogging of the carburettor.

Before storing the chain saw for an extended period, empty the fuel tank, clean it then run the motor to empty the carburettor.

NOTE. Do not discard an unwanted fuel container with household waste. It must be taken to an authorised repository site.

Mixing fuel (50:1 mixing ratio)

1.Measure out the quantities of petrol and oil to be mixed.

2.Put some of the petrol into a clean, approved fuel container.

3.Pour in all of the oil and mix well.

4.Pour in the rest of the petrol and again mix well (at least one minute).

5.It is very important to mix the two ingredients properly to prevent unnecessary engine wear.

6.Make sure that the container is clearly labelled that it is 2-stroke mixture.

Fuelling the chain saw

1.The engine must be stopped and cool. Place the chainsaw on its side with the fuel tank cap facing upwards.

2.Make sure that the fuel mixture is well mixed.

3.Remove the fuel tank cap (24).

4.Fill the fuel tank to about 80% of its capacity.

5.Fasten the fuel cap securely and wipe up any fuel spillage around the machine.

PCH37 specifications

Global Machinery Company (GMC) has earned a reputation as a leading player in the manufacturing sector, particularly with its innovative product, the PCH37. This advanced machine integrates state-of-the-art technologies and engineering expertise, making it a cornerstone for various industrial applications.

The PCH37 is designed with a robust framework that ensures durability and reliability in demanding environments. One of the standout characteristics of this machine is its flexible architecture, allowing it to be easily customized for a wide range of tasks. This versatility makes it suitable for sectors such as construction, manufacturing, and materials handling.

At the heart of the PCH37 is its intelligent automation system. It employs advanced sensors and machine learning algorithms that enable real-time monitoring and adjustments, enhancing the efficiency of operations. This technology not only improves productivity but also reduces wastage, making it an environmentally sustainable choice. Operators benefit from an intuitive interface that simplifies control, ensuring that even those with minimal experience can quickly adapt to using the machine.

Moreover, the PCH37 is equipped with cutting-edge powertrain technology. Its hybrid engine system combines electric and hydraulic components, optimizing energy consumption while maintaining high performance. This feature aligns with global trends towards greener technology, as it significantly lowers the carbon footprint during operation.

Safety is paramount in the design of the PCH37. It includes comprehensive safety features such as automatic shut-off mechanisms, emergency stop buttons, and reinforced structures that protect operators and nearby personnel. GMC also prioritizes operator training, ensuring that users are well-versed in safety protocols and machine functionality.

In terms of maintenance, the PCH37 is engineered for accessibility. With strategically placed service points and a self-diagnostic system, routine checks and repairs can be conducted with minimal downtime. This maintenance approach translates into lower operational costs and prolonged machine lifespan.

Overall, the Global Machinery Company PCH37 is a testament to innovative engineering, blending cutting-edge technology with user-friendly design and sustainability. Its main features, including intelligent automation, hybrid power, and robust safety protocols, underscore GMC's commitment to excellence in the industrial machinery sector. As industries continue to evolve, the PCH37 stands ready to meet the challenges of tomorrow while delivering reliable performance today.

Global Machinery Company PCH37 Filling up with fuel and oil, Mixing fuel 501 mixing ratio

Models: PCH37