Intel SBC-776 manual LCD or VGA Enable Header JP10, VGA connector CN6

LCD or VGA Enable Header (JP10)

	* Default VGA			Dual Display
1		3	5	1	3	5
VGA Enable				VGA/LCD Enable
LCD 2PIXS/CLK				LCD 1PIXS/CLK
2		4	6	2	4	6

VGA connector (CN6)

The mainboard's PCI SVGA interface can drive conventional CRT displays and is capable of driving a wide range of flat panel displays, including electroluminescent (EL), gas plasma, passive LCD, and active LCD displays. The board has two connectors to support these displays, one for standard CRT VGA monitors and one for flat panel displays.

VGA display connector (CN6)

CN6 is a 15-pin, dual-in-line header used for conventional CRT displays. A simple one-to-one adapter can be used to match CN6 to a standard 15-pin D-SUB connector commonly used for VGA.

VGA display connector (CN6)

Pin	Signal	Pin	Signal
1	RED	9	VCC
2	GREEN	10	GND
3	BLUE	11	N/C
4	N/C	12	DDDA
5	GND	13	H-SYNC
6	GND	14	V-SYNC
7	GND	15	DDCK
8	GND	16	N/C

2 8 SBC-776 Manual