Hardware Diagnostic Testing

Troubleshooting

Are all peripheral devices installed correctly?

If the system has a hard disk drive, is it properly formatted or configured?

Are all device drivers properly installed?

Are the configuration settings made in Setup correct?

Is the operating system properly loaded? Refer to the operating system documentation.

Did you press the system power on/off switch on the front panel to turn the server on (power on light should be lit)?

Is the system power cord properly connected to the system and plugged into a

NEMA 5-15R outlet for 100-120 V or a NEMA 6-15R outlet for 200-240 V ?

Are all integrated components from the tested components lists? Check the tested memory, and chassis lists, as well as the supported hardware and operating system list. See “Additional Information and Software” for links to the tested component lists.

This section provides a more detailed approach to identifying a hardware problem and locating its source.

CAUTION

Turn off devices before disconnecting cables: Before disconnecting any peripheral cables from the system, turn off the system and any external peripheral devices. Failure to do so can cause permanent damage to the system and/or the peripheral devices.

1.Turn off the system and all external peripheral devices. Disconnect each of device from the system, except for the keyboard and the video monitor.

2.Make sure the system power cord is plugged into a properly grounded AC outlet.

3.Make sure your video display monitor and keyboard are correctly connected to the system. Turn on the video monitor. Set its brightness and contrast controls to at least two thirds of their maximum ranges (see the documentation supplied with your video display monitor).

4.If the operating system normally loads from the hard disk drive, make sure there is no diskette in drive A and no CD-ROM disk in the CD-ROM drive.

5.If the power LED does light, attempt to boot from a floppy diskette or from a CD-ROM disk.

6.Turn on the system. If the power LED does not light, see “Power Light Does Not Light.”

Verifying Proper Operation of Key System Lights

As POST determines the system configuration, it tests for the presence of each mass storage device installed in the system. As each device is checked, its activity light should turn on briefly. Check for the following:

Does the diskette drive activity light turn on briefly? If not, see “Diskette Drive Activity Light Does Not Light.”

If system LEDs are illuminated, see “LED Information” for a description of the light and steps to take to correct the problem.

Intel Server Board SE7210TP1-E User Guide

SE7210TP1-E specifications

The Intel SC5200, SR1325TP1-E, SE7210TP1-E, and SC5250-E are high-performance server boards designed to meet the demands of data-intensive applications and enterprise environments. These boards represent Intel's commitment to delivering reliable and scalable solutions for modern computing needs.

The Intel SC5200 is a versatile server chassis that supports a range of Intel processors, making it ideal for various applications. It features a robust design that ensures high levels of reliability and uptime. The SC5200 supports multiple drive bays, offering extensive storage options, and is equipped with advanced cooling solutions to maintain optimal operating temperatures during heavy workloads.

The SR1325TP1-E is a server board designed for Intel's Xeon processors, providing excellent performance for demanding server tasks. A standout feature of this board is its support for Intel's Virtualization Technology, which enables efficient resource management and improved performance when running multiple virtual machines. The SR1325TP1-E also includes multiple PCI Express slots, allowing for expandable connectivity options and the ability to add high-speed networking or storage controllers as needed.

On the other hand, the SE7210TP1-E is specifically designed for entry-level servers. It supports dual Intel Xeon processors, providing outstanding processing power in a compact form factor. This board emphasizes energy efficiency while still delivering essential performance features, with support for error-correcting code (ECC) memory, enhancing data integrity and system reliability.

The SC5250-E enhances the capabilities of Intel's server offerings with support for high-density configurations. It features an advanced Intel I/O controller hub, which provides high-speed connectivity options, including SATA and USB ports. The SC5250-E supports advanced RAID configurations, allowing for robust data redundancy and protection strategies that are vital in enterprise environments.

These servers are designed with security features in mind, integrating Intel's Trusted Execution Technology, which safeguards sensitive data and enhances protection against various security threats. Overall, the Intel SC5200, SR1325TP1-E, SE7210TP1-E, and SC5250-E exemplify Intel's dedication to providing powerful, reliable, and efficient server solutions that cater to the evolving needs of businesses and enterprises.