Intel SE7210TP1-E manual Bios Post Beep Codes, Bios Recovery Beep Codes

Page 42

Troubleshooting

BIOS Error Messages (continued)

Error Message

Explanation

 

 

 

On Board Parity Error

A parity error occurred in onboard memory. This error is followed

 

by an address.

 

 

 

Parity Error

A parity error occurred in onboard memory at an unknown

 

address.

 

 

 

NVRAM / CMOS / PASSWORD

NVRAM, CMOS, and passwords have been cleared. The system

cleared by Jumper

should be powered down and the jumper removed.

 

 

 

<CTRL_N> Pressed

CMOS is ignored and NVRAM is cleared. User must enter Setup.

 

 

 

BIOS POST Beep Codes

The table below lists the POST error beep codes. Prior to system video initialization, the BIOS uses these beep codes to inform users of error conditions. The beep code occurs only when a critical error occurs or when the BIOS fails to boot to the operating system. Please note that not all error conditions are supported by BIOS beep codes.

Table 6.

Beep Codes

 

Number of Beeps

Description

 

 

 

 

1

 

Refresh failure

 

 

 

 

2

 

Parity cannot be reset

 

 

 

 

3

 

First 64 Kb memory failure

 

 

 

 

4

 

Timer not operational

 

 

 

 

5

 

Processor failure (Reserved; not used)

 

 

 

 

6

 

8042 GateA20 cannot be toggled (memory failure or not present)

 

 

 

 

7

 

Exception interrupt error

 

 

 

 

8

 

Display memory R/W error

 

 

 

 

9

 

(Reserved; not used)

 

 

 

 

10

 

CMOS Shutdown register test error

 

 

 

 

11

 

Invalid BIOS (such as, POST module not found)

 

 

 

 

BIOS Recovery Beep Codes

Table 7. BIOS Recovery Beep Codes

Number of Beeps

Reason

 

 

1

One long beep – video is active.

 

 

1-2

One long beep and two short beeps: Insert the BIOS recovery diskette.

 

 

42

Intel Server Board SE7210TP1-E User Guide

Image 42
Contents Intel Entry Server Board SE7210TP1-E User Guide Disclaimers About this Manual Product AccessoriesPreface Manual OrganizationAdditional Information and Software Safety Information Emissions Disclaimer重要安全指导 Contents Intel Server Issue Report Form Regulatory and Compliance InformationFigures TablesContents Server Board Features Intel Server Board SE7210TP1-EServer Board Features Feature DescriptionServer Board Connector and Component Locations Intel Server Board SE7210TP1-E LayoutInternal Component Connections Making Connections to the Server BoardConfiguration Jumpers Configuration Jumper J1D1Jumper Name Pins What happens at system reset… Back Panel Connectors NIC LEDsLED Color LED State Description Processor Power SupplyHardware Requirements MemoryPage Installing DIMMs Server Board Installations and UpgradesInstalling and Removing Memory Before You BeginInstalling Memory Removing DIMMsInstalling or Replacing the Processor Installing the ProcessorAttaching the Heat Sink to the Processor TP00522 Installing a PCI Card Replacing the Backup BatteryRemoving the Processor Varning Page Server Utilities Bios SetupKeyboard Commands Press DescriptionRecording the Current Bios Settings Upgrading the BiosPreparing for the Upgrade Obtaining the UpgradeUpgrading the Bios Creating a Bootable DisketteCreating the Bios Upgrade Diskette Recovering the Bios Changing the Bios LanguageManually Recovering the Bios Clearing the Password Clearing the CmosProblems following Initial System Installation TroubleshootingResetting the System First Steps ChecklistHardware Diagnostic Testing Verifying Proper Operation of Key System LightsSpecific Problems and Corrective Actions Power Light Does Not LightConfirming Loading of the Operating System No Characters Appear on Screen Characters Are Distorted or IncorrectSystem Cooling Fans Do Not Rotate Properly Diskette Drive Activity Light Does Not LightCD-ROM Drive or DVD-ROM Drive Activity Light Does Not Light Problems with Network Cannot Connect to a ServerSystem Boots when Installing PCI Card Problems with Newly Installed Application SoftwareBootable CD-ROM Is Not Detected Hard Drives are not RecognizedLED Information LED Name Function Location Color CorrectionBios Error Messages Bios Error MessagesError Message Explanation Bios Recovery Beep Codes Bios Post Beep CodesBios Recovery Beep Codes Beep CodesIntel Server Board SE7210TP1-E User Guide Product Regulatory Compliance Product Safety ComplianceRegulatory and Compliance Information Product EMC ComplianceElectromagnetic Compatibility Notices Product Regulatory Compliance MarkingsProduct Certification Markings Industry Canada ICES-003 Europe CE Declaration of ConformityTaiwan Declaration of Conformity Korean RRL Compliance Australia / New ZealandGetting Help World Wide Web TelephoneIntel Server Issue Report Form ˆ Other Vendor / Model DIMM2B Vendor/part numberP32 Segment a PCI 32/33 Peripheral Card Or Peripheral Description DriverBase FW Rev# Revision Address P64 Segment B PCI-X 64/66 VideoComplete Problem Description
Related manuals
Manual 11 pages 41.06 Kb

SE7210TP1-E specifications

The Intel SC5200, SR1325TP1-E, SE7210TP1-E, and SC5250-E are high-performance server boards designed to meet the demands of data-intensive applications and enterprise environments. These boards represent Intel's commitment to delivering reliable and scalable solutions for modern computing needs.

The Intel SC5200 is a versatile server chassis that supports a range of Intel processors, making it ideal for various applications. It features a robust design that ensures high levels of reliability and uptime. The SC5200 supports multiple drive bays, offering extensive storage options, and is equipped with advanced cooling solutions to maintain optimal operating temperatures during heavy workloads.

The SR1325TP1-E is a server board designed for Intel's Xeon processors, providing excellent performance for demanding server tasks. A standout feature of this board is its support for Intel's Virtualization Technology, which enables efficient resource management and improved performance when running multiple virtual machines. The SR1325TP1-E also includes multiple PCI Express slots, allowing for expandable connectivity options and the ability to add high-speed networking or storage controllers as needed.

On the other hand, the SE7210TP1-E is specifically designed for entry-level servers. It supports dual Intel Xeon processors, providing outstanding processing power in a compact form factor. This board emphasizes energy efficiency while still delivering essential performance features, with support for error-correcting code (ECC) memory, enhancing data integrity and system reliability.

The SC5250-E enhances the capabilities of Intel's server offerings with support for high-density configurations. It features an advanced Intel I/O controller hub, which provides high-speed connectivity options, including SATA and USB ports. The SC5250-E supports advanced RAID configurations, allowing for robust data redundancy and protection strategies that are vital in enterprise environments.

These servers are designed with security features in mind, integrating Intel's Trusted Execution Technology, which safeguards sensitive data and enhances protection against various security threats. Overall, the Intel SC5200, SR1325TP1-E, SE7210TP1-E, and SC5250-E exemplify Intel's dedication to providing powerful, reliable, and efficient server solutions that cater to the evolving needs of businesses and enterprises.