Intel TE430VX Floppy a Type, Floppy B Type, Floppy Access, IDE Device Configuration Subscreen

Page 48

TE430VX MotherboardMotherboard Technical Product Specification

3.12.3.3Floppy A: Type

Specifies the physical size and capacity of the diskette drive. The options are Disabled, 360 KB, 5.25-inch; 1.2 MB, 5.25-inch; 720 KB, 3.5-inch; 1.44/1.25 MB, 3.5-inch; 2.88 MB, 3.5-inch. The default is 1.44/1.25 MB, 3.5-inch.

3.12.3.4Floppy B: Type

Specifies the physical size and capacity of the diskette drive. The options are Disabled, 360 KB, 5.25-inch; 1.2 MB, 5.25-inch; 720 KB, 3.5-inch; 1.44/1.25 MB, 3.5-inch; 2.88 MB, 3.5-inch. The default is Disabled.

3.12.3.5Floppy Access

Specifies read/write access for all attached floppy drives. The options are Read/Write and Read Only. The default is Read/Write.

3.12.4IDE Device Configuration Subscreen

3.12.4.1IDE Device Configuration

Used to manually configure the hard drive or have the system auto configure it. The options are Auto Configured, User Definable and Disabled. The default is Auto Configured. If you select User Definable then the Number of Cylinders, Number of Heads, and Number of Sectors items can be modified.

3.12.4.2Number of Cylinders

If IDE Device Configuration is set to User Definable, you must type the correct number of cylinders for your hard disk. If Hard Disk Type is set to Auto Configured, this reports the number of cylinders for your hard disk and cannot be modified.

3.12.4.3Number of Heads

If IDE Device Configuration is set to User Definable, you must type the correct number of heads for your hard disk. If Hard Disk Type is set to Auto Configured, this reports the number of heads for your hard disk and cannot be modified.

3.12.4.4Number of Sectors

If IDE Device Configuration is set to User Definable, you must type the correct number of sectors for your hard disk. If Hard Disk Type is set to Auto Configured, this reports the number of sectors for your hard disk and cannot be modified.

3.12.4.5Maximum Capacity

Reports the maximum capacity of your IDE Device. It is calculated from the number of cylinders, heads, and sectors. There are no options here.

48

Image 48
Contents TE430VX Revision Revision HistoryDate Table of Contents TE430VX Motherboard Technical Product Specification Motherboard ResourcesMotherboard Bios and Setup Utility Error Messages and Beep CodesContents Page Motherboard Description OverviewTigereye board diagram Motherboard Manufacturing Options Form FactorMotherboard Description Microprocessor Upgrade MicroprocessorMemory System MemoryChipset SdramSecond Level Cache 1 82430VX System Controller TVX2 82430VX Data Path TDX PCI ISA/IDE Xcelerator PIIX3Real time clock, Cmos RAM and battery Ultra I/O Interface Controller SMC FDC37C93FRFloppy controller Keyboard and mouse interfaceGraphics Subsystem S3 Trio64V+ IrDA infra-red supportConsumer IR Support Parallel portResolutions supported Graphics ResolutionsAudio Subsystem Creative Labs Vibra 16C Graphics Drivers and UtilitiesVibra 16C resource map Audio DriversMotherboard Connectors Motherboard Connector LocationsCD-ROM Connector J2F2 Wave Table Connector J2F3Telephony Connector J2F1 Power Connector J7M2Floppy Drive Connector J10H1 IDE Connectors J9H1, J9H2Motherboard Description Signal Name Front Panel I/O Connectors J9E2 IDE Connectors J9H1, J9H2ISA Connectors- J1A1, J1A2, J1B1 PCI Connectors J2C1, J2D1, J2E1, J2E2 ISA ConnectorsSignal Name Pin PinPower Supply Connectors PCI Connectors J2C1, J2D1, J2E1, J2E2Front panel Connectors SpeakerReset Sleep or Power LEDInfra-Red IrDA connector HD LEDRemote ON/OFF and Soft Power Support Back Panel ConnectorsAdd-in Board Expansion Connectors O ConnectionsJumper Settings ConfigurationFunction JumperCPU Configuration J9C1-C, D Clear Cmos J9C1-A, Pins 4,5,6Password clear J9C1-A, Pins 1,2,3 Cmos Setup Access J9C1-B, Pins 1,2,3Bios Recovery J7A1 Motherboard Environmental SpecificationsReliability EnvironmentalPower Consumption Regulatory ComplianceICES-003, Issue 15.2 EMI Cispr 22, 2nd Edition15.2.2 EN 55 022 15.2.3 EN 50 082-1Installation Requirements Follow Installation InstructionsCanadian Compliance Assure Host System CompatibilityAssure Host System & Accessory Certifications Installation PrecautionsBattery Marking Overload ProtectionPage Memory Map I/O MapMemory Map O MapAddress hex Size PCI Configuration Space Map PCI Configuration Space MapSoft-Off Control DMA ChannelsInterrupts InterruptsBios Flash Memory Organization IntroductionFlash Memory Organization System AddressBios Upgrades Recommendations for Configuring an Atapi DevicePCI IDE Support Primary CablePCI Auto-configuration Motherboard Bios and Setup UtilityISA Plug and Play Advanced Power Management Boot OptionsLanguage Support Setup Enable Jumper Bios Setup ProgramOverview of the Setup Menu Screens Flash Logo AreaMain Bios Setup Screen System DateSystem Time Floppy OptionsBoot Options Video ModePrimary Slave Secondary MasterFloppy Access IDE Device Configuration SubscreenFloppy a Type Floppy B TypeIDE Translation Mode Multiple Sector SettingBoot Options Subscreen First, Second, Third, Fourth Boot DeviceSetup Prompt Typematic Rate DelayNum Lock Typematic Rate ProgrammingPeripheral Configuration Advanced Chipset ConfigurationPower Management Configuration Plug and Play ConfigurationSerial Port 2 IR Mode Parallel Port ModeAdvanced Chipset Configuration Subscreen Parallel Port AddressLatency Timer PCI Clocks Power Management Configuration SubscreenAdvanced Power Management IDE Drive Power DownPlug and Play Configuration Subscreen Boot with PnP OSISA Shared Memory Size ISA Shared Memory Base AddressAdministrative and User Access Modes Administrative and User Password FunctionsPassword Set Security ScreenSecurity Screen Options User Password is Administrative Password isSet User Password Set Administrative PasswordLoad Setup Defaults Discard ChangesPage Bios Beep Codes PCI Configuration Error MessagesBeeps Error Message Bios Error Messages Error MessageExplanation Bios Error Messages Error Messages and Beep CodesISA NMI Messages ISA NMI Message Explanation

TE430VX specifications

The Intel TE430VX was a landmark product in the realm of computing during the early 1990s. This microprocessor, part of Intel's line of Pentium processors, was primarily aimed at the burgeoning market for personal and business computing.

One of the main features of the Intel TE430VX was its 32-bit architecture, which allowed for a significant increase in processing power compared to its predecessors. The 32-bit data bus enabled the handling of larger amounts of data simultaneously, enhancing overall system performance. The TE430VX was capable of executing instructions at clock speeds ranging from 60 MHz to 66 MHz, which was quite impressive for its time. This processing power made it suitable not only for everyday computing tasks but also for more demanding applications such as graphic design and gaming.

The TE430VX also incorporated advanced technologies such as pipelining, which allowed it to execute multiple instructions in a single clock cycle. This feature contributed to improved performance and responsiveness, making the user experience smoother. The microprocessor supported a variety of RAM types, including EDO (Extended Data Out) RAM, which further enhanced its performance by reducing memory access times.

Another characteristic that set the TE430VX apart was its compatibility with a wide range of operating systems, including DOS, Windows, and various UNIX variants. This flexibility ensured that users could run their preferred software without compatibility issues, making it a versatile choice for home and business environments alike.

The integration of a built-in memory controller also simplified motherboard design, reducing the overall cost of systems utilizing the TE430VX. This chip also supported advanced graphics options, allowing users to experience better multimedia performance through dedicated graphics cards.

Power consumption was another consideration in the design of the TE430VX. It was engineered to operate efficiently while maintaining good performance, an important factor for long-term sustainability in computing environments.

In summary, the Intel TE430VX was a significant advancement in microprocessor technology during the early 1990s. Its 32-bit architecture, pipelining capabilities, compatibility with multiple operating systems, and efficient power consumption contributed to its reputation as a reliable choice for both personal and professional use, solidifying Intel's position as a leader in the computing landscape.