Back Panel Configuration
PS/2 | LAN | Printer Port | Game Port | |
Mouse |
| |||
PS/2 | USB | COM1 | COM2 | |
|
|
| Speaker Mic In | |
Keyboard |
|
| ||
|
|
|
| Out Line In |
PS/2 Mouse & PS/2 Keyboard Connectors: KB/MS
This mainboard provides a standard PS/2 mouse connector and PS/2 Keyboard connector. The pin assignments are described below:
PS/2 Mouse
PS/2 Keyboard
Pin | Assignment | Pin | Assignment |
1 | Data | 4 | +5 V (fused) |
2 | No connect | 5 | Clock |
3 | Ground | 6 | No connect |
USB & LAN Connectors: USB/ LAN
There are two USB connectors on the back panel. These OHCI (Open Host Controller Interface) Universal Serial connectors are used to attach to USB devices such as: keyboards, mice and other USB devices. You can plug the USB devices directly into this connector. The
| Pin | Assignment | Pin | Assignment | |
LAN | 1 | TDP | 7 | NC | |
2 | TDN | 8 | NC | ||
| |||||
| 3 | RDP | 9 | VCC3 SBY | |
| 4 | NC | 10 | ACT LED | |
| 5 | NC | 11 | VCC3 SBY | |
USB | 6 | RDN | 12 | Speed LED | |
| Pin | Assignment | Pin | Assignment | |
| 1/5 | +5 V (fused) | 3/7 | USBP0+/P1+ | |
| 2/6 | 4/8 | Ground |
10