Intel PX865PEL-800 Use IR Pins, Onboard Parallel Port, Parallel Port Mode, EPP Mode Select

PX865PEL-800

Use IR Pins

Consult your IR peripheral documentation to select the correct setting of the TxD and RxD signals. This field only configurable if “UART Mode Select” is set to “ASKIR” or “IrDA”.

Options: Full、Half (default)

Onboard Parallel Port

Select an address and corresponding interrupt for the onboard parallel port.

Options: 378/IRQ7 (default)、278/IRQ5、3BC/IRQ7、Disabled

Parallel Port Mode

This option allows you to select an parallel port mode for the on board parallel port.

Options: ECP(default)	Extended Capabilities Port.
EPP	Enhanced Parallel Port.
SPP	Standard Printer Port.
ECP+EPP	ECP & EPP mode.
Normal

EPP Mode Select

Select EPP port type 1.7 or 1.9. This field is only configurable if “Parallel Port Mode” is set to “EPP” or “ECP+EPP”. Options: EPP 1.9(default)、EPP 1.7

ECP Mode Use DMA

Select a DMA Channel for the parallel port when using the ECP mode. This field is only configurable if “Parallel Port Mode” is set to “ECP”. Options: 3 (default)、1

Game Port Address

Game Port I/O Address. Options: 201 (default)、209、Disabled

Midi Port Address

Midi Port Base I/O Address. Options: 330、300 (default)、290、Disabled

Midi Port IRQ

This determines the IRQ that the Midi Port will use. Options: 5、10 (default)

33